c669abf9-31a3-40d0-9954-3e8a31f2bf73 2025-01-28T09:10:39.469082Z ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product MEDSEA_CH1_Product_1 / Wind and wave data set from MARINA project 2016-11-21 creation DOI:10.12770/c669abf9-31a3-40d0-9954-3e8a31f2bf73 MEDSEA D2.3.5 Today's normative and regulatory requirements to assess the producible energy from wind rely on in situ measurements (mast with anemometric sensors), which are extremely costly to Implement offshore. However, proof should be provided that hindcast model results are highly reliable, in order to provide an equivalent assessment. Very high resolution models is also the key issue in decision making for a proper siting that is relaying on the consistency of all datasets provided in the assessment. In this tender the products of the FP7 MARINA project will be used. 10-year (2001-2010) highresolution atmospheric, wave, tidal and ocean current simulations will be used. The model outputs are at high resolution (0.05x0.05 degree horizontal resolution, 1-hour time resolution, 5-vertical levels at 10,40,80,120,180 m). The wave parameters are co-located with the meteorological output fields. Satellite altimetry data from ENVISAT and JASON satellites have been assimilated in the system. Other wind and wave satellite data sets will be also analyzed (Synthetic Aperture Radars-SAR for example). At the same co-located points the tidal and ocean current data together with bathymetry are available. For preselected points in the North Western Mediterranean (Spain-France-ltaly areas) directional wave spectra data have been saved and are available. From SKIRON meteorological model available parameters are: WIND SPEED (m/s), WIND DIRECTION (deg), AIR PRESSURE (hPa), AIR DENSITY (Kgr/m3), TEMPERATURE (K), MODEL SEAMASK From the wave model available parameters: SIGNIFICANT WAVE HEIGHT (m), MEAN WAVE DIRECTION (deg), WAVE MEAN PERIOD (s), PEAK WAVE PRERIOD (s), SWELL WAVE HEIGHT (m), MEAN SWELL PERIOD (s), MEAN DIRECTIONAL SPREAD, WINDSEA MEAN DIRECTIONAL SPREAD, SWELL MEAN DIRECTIONAL SPREAD, MAXIMUM WAVE HEIGHT (m) Support the evaluation of the suitability of sites for wind farm development in particular: o on border between Spanish and French waters o on border between French and Italian waters EMODnet Medsea Checkpoint University of Athens kallos@mg.uoa.gr pointOfContact George Kallos University of Athens kallos@mg.uoa.gr author George Galanis University of Athens ggalanis@mg.uoa.gr author Platon Patlakas University of Athens platon@mg.uoa.gr author Christina Kalogeri University of Athens chriskal@mg.uoa.gr author EMODnet Medsea Checkpoint back-end-medsea-ckpt@cls.fr publisher https://sextant.ifremer.fr/geonetwork/srv/api/records/c669abf9-31a3-40d0-9954-3e8a31f2bf73/attachments/CH1_1.JPG MedSea - CH01 - Windfarm Siting Used by challenges 2015-11-26 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.challenges Forecast/Hindcast Processing level of characteristics 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.level.of.characteristics Delayed Production mode 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.production.mode Atmospheric conditions GEMET - INSPIRE themes, version 1.0 2009-09-22 publication geonetwork.thesaurus.external.theme.httpinspireeceuropaeutheme-theme Offshore wind energy Wind energy site assessment Numerical Atmospheric Modeling This EMODnet MedSea Checkpoint data product is the result of a stress test so called “challenge” specified by the call for tenders No MARE/2012/11 to determine how well the input data from the observing and monitoring systems existing at the sea basin scale fit the user requirements stated by the “challenge” partners to develop it (Data Product Specifications). The information contained in the data products and in the descriptions (metadata) of the input data and of the data products making use of them is believed to be trustworthy. However its completeness, consistency, accuracy and usability cannot be guaranteed. Whilst every effort has been made to ensure its reliability within the limits of present knowledge, no responsibility can be accepted by those involved in its compilation or publication for any consequential loss or damage arising from its use. For further information, refer to the Second Data Adequacy Report available on the EMODnet Medsea Checkpoint portal at http://www.emodnet-mediterranean.eu/reports_news/ db4dcd80-1169-450a-a4e8-eae2b839b5ee e97a2074-0902-4e5d-a0d9-57458df80671 4e04ad5e-219e-4c54-90a5-7698057c43b2 83f2d145-669c-4713-af98-c1f3e78e079a 3a8d490b-883e-45ca-a0bf-a7ef542b31e9 grid utf8 oceans 2 10.5 41 44.5 2001-01-01T00:00:00 2010-12-31T23:00:00 -186 0 Ascii https://doi.org/10.12770/c669abf9-31a3-40d0-9954-3e8a31f2bf73 DOI DOI of the product DOI of the product https://sextant.ifremer.fr/documentation/medcheckpoint/CH1_product_1.xml OGC:OWS-C CH1_product_1 Product visualization http://www.emodnet-mediterranean.eu WWW:LINK Access to the website 2 10.5 41 44.5 2001-01-01T00:00:00 2010-12-31 -180 0 MEDSEA_CH1_Product_1 10 year high spatial and temporal resolution wind wave hindcast data Air|Wind speed and direction|Eastward wind velocity in the atmosphere|Forecast/Hindcast|Delayed Air|Wind strength and direction|Northward wind velocity in the atmosphere|Forecast/Hindcast|Delayed Air|Air pressure|Pressure (measured variable) exerted by the atmosphere|Forecast/Hindcast|Delayed Marine water|Wave height and period statistics||Forecast/Hindcast|Delayed Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 257526.36 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 180 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 3652 Number of Characteristics AP.2.1 Number of characteristics in product Integer 4 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 5000 Vertical resolution AP.3.2 Average vertical sampling Real meters 40 2016-11-21T00:00:00 0, 10, 40, 80, 120, 180 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 0.042 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % 10 Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date Integer days 1095 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % 0 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % 0 Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 0 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % 0 Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % 0 Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % 10 Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0