db445a8f-3a54-4937-b407-e1876440d0ba 2025-01-28T08:42:45.445944Z ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product http://www.opengis.net/def/crs/EPSG/0/4326 ATLANTIC_CH01_Product_2 / Map of windfarm siting suitability in the area where waters of France and Spain meet in Bay of Biscay on 500 m contour 2018-02-01 creation DOI:10.12770/db445a8f-3a54-4937-b407-e1876440d0ba Not Applicable The three digital maps provided in this product aim to assess the degree of Offshore windfarm siting suitability existing over a geographical area with a focal point where waters of France and Spain meet in Biscay Bay on 500 m depth. The maps display respectively the spatial distribution of the average and lowest windfarm siting suitability scores along with the average wind speed distribution over a time period of 10 years. They are part of a process set up to assess the fit for use quality of the currently available datasets to support a preliminary selection of potential offshore sites for wind energy development. To build these maps, GIS tools were applied to several key spatial datasets from the 5 data type domains considered in the project: Air, Marine Water, Riverbed/Seabed, Biota/Biology and Human Activities, collated during the initial stages of the project. Initially, each selected dataset was formatted and clipped to the study area extent and spatially classified according to suitability scores, to define raster layers with the variables depicting levels of current anthropogenic and environmental spatial occupation of activities, seabed depth and slope, distances to shoreline, shipping intensity, mean significant wave height, and substrate type. These pre-processed layers were employed as inputs for applying a spatial multi-criteria model using a wind farming suitability classification based on a discrete 5 grades index, ranging from Very Low up to Very High suitability. In adition to suitability maps, an average wind speed spatial distribution map for a 10 years period, at 10 m height, was obtained over the study area from the raster processing of a wind speed time series of monthly means available from daily wind analysis data. The characteristics of the datasets used in this exercise underwent an appropriateness evaluation procedure based on a comparison between their measured quality and those specified for the product. All the spatial information made available in these maps and from the subsequent appropriateness analysis of the datasets, contributes to a clearer overview of the amount of public-access baseline knowledge currently existing for the North Atlantic basin area. To determine the suitability of a site where waters of France and Spain meet in Bay of Biscay on 500 m contour for offshore wind farm development, to evidence the fitness for use of the current available marine datasets, as well as to point out gaps in the current Emodnet data collection framework. Instituto Português do Mar e da Atmosfera (IPMA) victorh@ipma.pt pointOfContact EMODnet Atlantic Checkpoint back-end-atlantic-ckpt@cls.fr publisher Instituto Português do Mar e da Atmosfera (IPMA) victorh@ipma.pt author Atlantic - CH01 - Windfarm Siting Used by challenges 2018-03-20 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.challenges High level analyzed Processing level of characteristics 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.level.of.characteristics Delayed Production mode 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.production.mode Energy resources GEMET - INSPIRE themes, version 1.0 2009-09-22 publication geonetwork.thesaurus.external.theme.httpinspireeceuropaeutheme-theme Draft Validation 2015-01-29 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.status This EMODnet Atlantic Checkpoint data product (the “Product”) is the result of a “challenge” stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an “as is” basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability or fitness for a particular purpose to the full extent permitted by law. The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product Limited: The product fails in most aspects to meet the objectives but meet some. This product is limited because was built with some key data inputs presenting important gaps or limited quality to correctly support OWF siting though some data components attained the needed requirements. d65b9e75-f2ce-4dfc-9a87-0261ebd25a62 697b3e20-e47a-460e-95ef-0a466996ff6e 43bc0ba3-defe-4ae9-8afd-4459a4e2f0b8 3b298f09-b347-423f-9474-98e34ae4110c bdfe3873-2dec-4d81-a7e4-e1b61297a790 e6739b31-2805-41b2-91da-d2f6115427f6 0c0b164d-173b-4d3e-a3c2-a05328cc89f8 bee88595-1915-4ed0-80c5-8490b2199645 dea2a1d0-9716-42cd-95a0-309e8604c31a d4ba73f7-770e-4b48-ad3d-92b4c9ffc29e 96b36766-d37f-478b-a053-eb4e7f0cff75 108abacb-322a-4c30-be27-c345078a11c9 a29b54a4-e690-4ede-92e3-e31f91e7f6d6 a5a32586-e195-4360-adcb-b24b3e9ef31c ee18994b-4d11-400b-8df5-e2f59f5fd3bc 21f46920-f8bd-4f95-b533-ca9dca25e46d 87a4e459-410e-45c7-a2f9-5b5f05e8b75b 1aa00940-9db8-498d-861a-aea19b34dab9 09ab0981-436a-440e-a1eb-969b4035884d 085280d7-0796-4039-af06-ba97a98631e9 98174dbd-1913-4679-8198-72bfde224e09 7a90cbef-ef10-46d6-91a3-02d20872b44f 3b9f73d5-6aae-4f75-aa1d-c90b6f314641 b5e64d97-2137-49c7-b903-ec00f74312e6 a58b37f8-7b2a-463f-85c3-00dcb5c8fde0 adab4363-2d57-45d0-8d47-16f905435a90 4dfbbc89-6af3-4d1b-abf0-f77310835a77 3cc639c4-c3b6-4e25-9d66-d157a737efc0 grid utf8 oceans -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 10 10 ESRI Raster https://doi.org/10.12770/db445a8f-3a54-4937-b407-e1876440d0ba WWW:LINK-1.0-http--metadata-URL DOI of the product DOI of the product https://sextant.ifremer.fr/documentation/atlcheckpoint/contexte/challenge1_product2.xml OGC:OWS-C CH01_product_02 Product visualization http://www.emodnet-atlantic.eu WWW:LINK Access to the website https://sextant.ifremer.fr/documentation/atlcheckpoint/product/CH_1_product_2.zip WWW:DOWNLOAD-1.0-link--download Download product Download product ATLANTIC_CH01_Product_2_1 Seabed depth Human activities|Horizontal spatial co-ordinates|MPA Network - spatial extent|High level analyzed|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 21194.3 2017-08-29T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 5000 2017-08-29T00:00:00 0-5000 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2017-08-29T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2017-08-29T00:00:00 The countries France and Spain delivered data. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-08-29T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 230 2017-08-29T00:00:00 1/8´ Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-08-29T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-08-29T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 420 2017-08-29T00:00:00 Usability AP.5.1 Excellent 2018-01-10T00:00:00 This dataset is beyond the needs of this product. ATLANTIC_CH01_Product_2_2 Wave-induced water motion Marine water|Wave height and period statistics|Significant height of waves {Hs} on the water body|Forecast/Hindcast|Real-time (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 21194 2017-08-31T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-08-31T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 1080 2017-08-31T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-08-31T00:00:00 Modeled dataset. No information in metadata on the countries that delivered data. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-08-31T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 11120 2017-08-31T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-08-31T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 0.0416667 2017-08-31T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 1 2017-08-31T00:00:00 daily Usability AP.5.1 Good 2018-01-10T00:00:00 Although the temporal coverage is limited this gap will be decreasing as this dataset has been updated regularly. As a result, it may be deemed enough for the main purposes of this large scale assessment OWF siting considering. ATLANTIC_CH01_Product_2_3 Wind speed Air|Wind strength and direction|Wind speed in the atmosphere|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 10 150 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 21194 2017-09-01T00:00:00 Covers all study area Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 10 2017-09-01T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 3405 2017-09-01T00:00:00 Production of layers begun in 01-05-2007 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-09-01T00:00:00 Modeled datasets. No information exists on the countries that delivered data. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-09-01T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 25000 2017-09-01T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-09-01T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 1 2017-09-01T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-09-01T00:00:00 update:2017-01-01 update irregular Usability AP.5.1 Limited 2018-01-10T00:00:00 Although datasets exist since 2007, the data is limited due to the coarse resolution layers and the fact that they only exist for 10 m height. ATLANTIC_CH01_Product_2_4 Essential Seabed habitats Biota - Biology|Habitat extent|Threatened and/or declining habitats|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-09-01T00:00:00 Only point locations exist within the study area. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-09-01T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2017-09-01T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2017-09-01T00:00:00 France and Spain were countries that delivered data. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-09-01T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-09-01T00:00:00 No information in metadata on recomended the scale or the resolution. Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-09-01T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-09-01T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 900 2017-09-01T00:00:00 30-06-2015 Usability AP.5.1 Very good 2018-01-10T00:00:00 This dataset contains tens of thousands features scattered all over the european seas. It currently gives a good account of the spatial distribution of many threatened and/or declining habitats/species. ATLANTIC_CH01_Product_2_5 Essential Fish habitats Biota - Biology|Habitat extent|Essencial Fish habitat extent|High level analyzed|Delayed (optional) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Coverage made for the USA coast. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 0 2018-01-10T00:00:00 Dataset made for the USA coast. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 NA Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 3650 2018-01-10T00:00:00 Usability AP.5.1 Inadequate 2018-01-10T00:00:00 The horizontal spatial coverage completeness can't be quantitatively assessed as it is highly incomplete (coverage only in part of USA coast). -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 ATLANTIC_CH01_Product_2_6 Seabed substrate Seabed - Riverbed|Lithology|Spatial distribution of Seabed substrate types|High level analyzed|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 14681 2018-01-10T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 France and Spain delivered data. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 312 2018-01-10T00:00:00 Avg of two datasets. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 525 2018-01-10T00:00:00 Usability AP.5.1 Limited 2018-01-10T00:00:00 Datasets in this component have good descrimination of sediment classes, but they contain gaps in spatial coverage gaps or resolution. ATLANTIC_CH01_Product_2_7 Coastline Human activities|Terrestrial mapping|coastline|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 21194 2018-01-10T00:00:00 The shoreline polygon covers all the North Atlantic Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-01-10T00:00:00 The metadata of this dataset (from NOAA) lacks information on the data contributor countries. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 250 2018-01-10T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 165 2018-01-10T00:00:00 Usability AP.5.1 Very good 2018-01-10T00:00:00 This coastline dataset matches the requirements needed to make this product. ATLANTIC_CH01_Product_2_8 Fisheries spatial occupation Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-01-10T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-01-10T00:00:00 Usability AP.5.1 2018-01-10T00:00:00 ATLANTIC_CH01_Product_2_9 MPA Network Human activities|Horizontal spatial co-ordinates|MPA Network - spatial extent|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 France and Spain were data providers. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 50 2018-01-10T00:00:00 One dataset has 50 m resolution and the other has no information available on metadata. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 1026 2018-01-10T00:00:00 Usability AP.5.1 Good 2018-01-10T00:00:00 Datasets are deemed good as they are compiled by credible European environmental institutions and they contain a large number of feature areas. ATLANTIC_CH01_Product_2_10 Vessel Traffic Density Human activities|Transport activity|Vessel Traffic Density|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 21194 2018-01-10T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-01-10T00:00:00 No information was foun on contributor countries as metadata does not exist Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 11270 2018-01-10T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-01-10T00:00:00 No editing date was found-No metadata. Usability AP.5.1 Limited 2018-01-10T00:00:00 This dataset is a very limited data resource. Moreover, it has a coarse resolution and metadata does not exist to explain the attributes range and their meaning. No free access to vessel traffic datasets was found though paid access sites are available. ATLANTIC_CH01_Product_2_11 Submarine cables Human activities|Industrial activity|Submarine telecommunication cables|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Some line features lay inside the study area. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 1 2018-01-10T00:00:00 Only one country (France) was found to deliver data, in one dataset metadata. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 50 2018-01-10T00:00:00 Only one out of four dataset has information on resolution in the metadata. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 714 2018-01-10T00:00:00 Usability AP.5.1 Good 2018-01-10T00:00:00 The component as a whole is assumed good. However, there is lack of resolution information in 3 out of 4 used datasets and there is uncertainty on the horizontal coverage completeness as it cannot be assessed. Comparing the amount of features among the datasets, it seems that knowledge gaps exist in all the current submarine cables datasets. ATLANTIC_CH01_Product_2_12 Offshore Installations Human activities|Industrial activity|Offshore Instalations|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Two datasets from OSPAR are considered. Features lay inside the study area for one dataset. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-01-10T00:00:00 No information was found on contributor countries as metadata is omiss in this regard. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 No information was found concerning scale. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 456 2018-01-10T00:00:00 Usability AP.5.1 Good 2018-01-10T00:00:00 The component is assumed good as data is issued by credible marine data producer institution (OSPAR ). No Offshore instalation is currently located there. However, there is uncertainty on the horizontal coverage completeness as it cannot be assessed: it is impossible to determine if no spatial feature inside the study area is due to a actual absence of feature or if it is a knowledge gap (i.e. no metadata information is made available in this regard). ATLANTIC_CH01_Product_2_13 limits of IBA sites Biota - Biology|Administrative units|Limits of IBA sites|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-01-10T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-01-10T00:00:00 Usability AP.5.1 2018-01-10T00:00:00 ATLANTIC_CH01_Product_2_14 Ports location Human activities|Terrestrial mapping|Ports geographic location|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Blank because Ports have only land coverage. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 It is considered that Spain and France delivered data because information was provided by EUROSTAT. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 50 2018-01-10T00:00:00 horizontal resolution provided in metadata. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 1825 2018-01-10T00:00:00 Usability AP.5.1 Very good 2018-01-10T00:00:00 The dataset found is good enough to this product (about 2200 features). ATLANTIC_CH01_Product_2_15 Dredging sites Human activities|Industrial activity|Dredging sites and locations.|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 No Feature was found in the study area. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 France and Spain were data providers. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 No information was found in metadata as to Scale. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 195 2018-01-10T00:00:00 Usability AP.5.1 Limited 2018-01-10T00:00:00 Limited because spatial coverage of sites would have been much more appropriate than mere point location, though we could implement exclusion buffers around the points. ATLANTIC_CH01_Product_2_16 Aggregate Extraction sites Human activities|Industrial activity|Aggregate Extraction locations|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Point extraction features exist within the study area Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 France and Spain were data providers according metadata. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 No information was found in metadata as to Scale value. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 928 2018-01-10T00:00:00 Usability AP.5.1 Limited 2018-01-10T00:00:00 Limited because spatial coverage of sites would have been much more appropriate than mere point location, though we could implement exclusion buffers around the points. ATLANTIC_CH01_Product_2_17 Munition sites Human activities|Administrative units|Munition dumping areas|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Polygon features Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 France and spain delivered data. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 NA Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 915 2018-01-10T00:00:00 Usability AP.5.1 Good 2018-01-10T00:00:00 A mix of polygon and point location were collated. The component usability is limited where only point data exist because spatial coverage of sites would have been much more appropriate than point location, though we could implement exclusion buffers around points. ATLANTIC_CH01_Product_2_18 Dredge spoil sites Seabed - Riverbed|Administrative units|Dredge spoil dumping areas|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Point features lay inside the study area. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 No information was found in metadata as to scale value. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 195 2018-01-10T00:00:00 Usability AP.5.1 Good 2018-01-10T00:00:00 The component is assumed good. However, there is uncertainty on the horizontal coverage completeness as it cannot be assessed. The component usability is limited where only point data exist because spatial coverage of sites would have been much more appropriate than point location, though we could implement exclusion buffers around points. ATLANTIC_CH01_Product_2_19 Cables and pipelines Human activities|Industrial activity|Cables and pipelines|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 No feature lays within the study area Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 0 2018-01-10T00:00:00 This dataset was collected from a national data repository (UK - The Crown State). Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 50 2018-01-10T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 99 2018-01-10T00:00:00 Usability AP.5.1 Inadequate 2018-01-10T00:00:00 This dataset is inadequate because it is based on the UK EEZ and no dataset was discovered concerning onshore power grid network for conection of the power submarine cables of windfarm plants required for the integration in the Energy system. ATLANTIC_CH01_Product_2_20 Offshore activities sites Human activities|Industrial activity|Offshore activities|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 No features of offshore installations are represented within the study area. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 1 2018-01-10T00:00:00 Spain delivered data for both datasets of this component. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 50 2018-01-10T00:00:00 The metadata in one dataset reports 50 m resolution and the metadata of the other no reference exists on scale or resolution. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 120 2018-01-10T00:00:00 Usability AP.5.1 Limited 2018-01-10T00:00:00 Component limited because spatial coverage with polygons would be much more appropriate than mere point locations, though we could implement exclusion buffers around the points for this study. One of the datasets contains only national data (UK). Moreover, the horizontal coverage completeness can't be quantitatively assessed from metadata. ATLANTIC_CH01_Product_2_21 Natura2000 spatial extent Biota - Biology|Administrative units|Natura2000 spatial extent|High level analyzed|Delayed (mandatory) -3.171167 -1.16867 42.872 44.87833 2006-01-01 2015-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-01-10T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-01-10T00:00:00 NA Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-01-10T00:00:00 NA Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2 2018-01-10T00:00:00 France and Spain delivered data according the metadata. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-01-10T00:00:00 NA Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-01-10T00:00:00 NA Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-01-10T00:00:00 NA Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-01-10T00:00:00 NA Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % NA Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 360 2018-01-10T00:00:00 Usability AP.5.1 Good 2018-01-10T00:00:00 The component is assumed good because it is an updated edition made by a credible institution (EEA). However, there is uncertainty on the horizontal coverage completeness as it cannot be assessed. Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % -0.00005378801785186615 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -0.00005378801785186615 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % 0 Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 54 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 54 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 76.98630136986301 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 76.98630136986301 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % -0.0014692621719179068 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -0.0014692621719179068 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % -70.42716319824754 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -70.42716319824754 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % -11.2 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -11.2 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % 95.83333 Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component 95.83333 Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 99.94520547945206 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 99.94520547945206 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % -0.0014692621719179068 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -0.0014692621719179068 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % -92.85714285714286 Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -92.85714285714286 Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % -6.76341730558598 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -6.76341730558598 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % -150 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -100 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % 0 Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 17.80821917808219 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 17.80821917808219 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -100 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -100 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % -30.73141314702019 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -30.73141314702019 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % -24.8 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -24.8 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 71.23287671232876 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 71.23287671232876 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % -0.0014692621719179068 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -0.0014692621719179068 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 50 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 50 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 90.95890410958904 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 90.95890410958904 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 80 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 80 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 6.301369863013699 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 6.301369863013699 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % -0.0014692621719179068 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -0.0014692621719179068 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % -125.4 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -100 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -50 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -50 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 90 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 90 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 60.87671232876713 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 60.87671232876713 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 75.01369863013699 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 75.01369863013699 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 90 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 90 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 89.31506849315069 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 89.31506849315069 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 49.15068493150685 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 49.15068493150685 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 49.863013698630134 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 49.863013698630134 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 89.31506849315069 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 89.31506849315069 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -100 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -100 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 90 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 90 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 94.57534246575342 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 94.57534246575342 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -50 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -50 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 90 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 90 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 93.42465753424658 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 93.42465753424658 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 67.12328767123287 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 67.12328767123287