fbb20839-ac88-48ca-bffb-417a939492f0 2025-01-28T08:40:16.035019Z ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product http://www.opengis.net/def/crs/EPSG/0/4326 ATLANTIC_CH10_Product_1 / Sample areas of digital bathymetry covering representative areas of the North Atlantic. 2018-01-01T00:00:00 creation DOI:10.12770/fbb20839-ac88-48ca-bffb-417a939492f0 Not Applicable This data product selects sample areas of digital bathymetry, chosen for their relevance to marine activities and data sources alternative to GEBCO. The approach for building the digital map of water depth is to use GEBCO as a baseline and look at a set of sample areas where GEBCO could be improved upon. Sample areas have also been selected to be representative of each continent bordering the Atlantic and expected future requirements. Data sources include GEBCO, EMODNET, USGS and CHS. To assess a sample set of sites, chosen for their relevance to marine activities such as navigation and wind farm siting, with respect to improving on the GEBCO bathymetry available there. HR Wallingford q.harpham@hrwallingford.com pointOfContact EMODnet Atlantic Checkpoint back-end-atlantic-ckpt@cls.fr publisher HR Wallingford q.harpham@hrwallingford.com author Atlantic - CH10 - Bathymetry Used by challenges 2018-03-20 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.challenges High level analyzed Processing level of characteristics 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.level.of.characteristics Delayed Production mode 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.production.mode Elevation GEMET - INSPIRE themes, version 1.0 2009-09-22 publication geonetwork.thesaurus.external.theme.httpinspireeceuropaeutheme-theme Approved Validation 2015-01-29 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.status This EMODnet Atlantic Checkpoint data product (the “Product”) is the result of a “challenge” stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an “as is” basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability or fitness for a particular purpose to the full extent permitted by law. The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product Good: The product meets more than 50% of the objectives specified by the challenge It was possible to build bathymetry for all of the sample areas, although it wasn't possible to improve on GEBCO for areas not covered by Europe, USA and Canada. Sources met minimum requirements of 500m resolution for sample areas, but rarely the desired 100m. There were usability problems with some sources: E.g. EMODnet - Due to supply format, metadata was unusable for large areas or whole tiles at a time. Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values). Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information. E.g. CHS - Data is in raster format, requires some pre-processing to extract depth band and convert to a format to use with other bathymetry layers, including merging into single layer. Confidence information hard to determine, not all data interpolated. Data was a mixture of continuous raster surfaces ranging to oddly scattered raster pixels, not a lot of consistency throughout the whole dataset. This was categorised into confidence values. 2afc945e-925b-4de3-a078-d810aa542b6d 72fea185-7548-40a6-9d4f-b26772b84a0d 0b2c5dde-0f96-4370-9037-e23f7686382c 0a2d91cf-72c8-4f9d-abd3-feba0200e51a vector utf8 oceans -98.64 12.19 -2.03 66.47 GeoTIFF https://doi.org/10.12770/fbb20839-ac88-48ca-bffb-417a939492f0 WWW:LINK-1.0-http--metadata-URL DOI of the product DOI of the product https://sextant.ifremer.fr/documentation/atlcheckpoint/contexte/challenge10_product1.xml OGC:OWS-C CH10_product_01 Product visualization http://www.emodnet-atlantic.eu WWW:LINK Access to the website https://sextant.ifremer.fr/documentation/atlcheckpoint/product/CH_10_product_1.zip WWW:DOWNLOAD-1.0-link--download Download product Download product ATLANTIC_CH10_Product_1_1 Gibraltar: A representative sample area to test data sources against GEBCO sited in an area of interest for European shipping Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory) -9.15 -5.7 34.5 37 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 84100 2018-03-28T00:00:00 Full AOI region covered. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-03-28T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-03-28T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-03-28T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-03-28T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 200 2018-03-28T00:00:00 Horizontal resolution exceeded the minimum requirement of 500m but did not meet desired requirement of 100m. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-03-28T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-03-28T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-03-28T00:00:00 Usability AP.5.1 Good 2018-03-28T00:00:00 EMODnet dataset used: Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values). Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information. ATLANTIC_CH10_Product_1_2 A representative sample area to test data sources against GEBCO sited in an area which could be explored for a possible wind farm with multi-jurisdiction. Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory) -10.63 -9.62 47.55 48.56 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 10000 2018-03-28T00:00:00 Full AOI is covered Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-03-28T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-03-28T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-03-28T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-03-28T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 232 2018-03-28T00:00:00 Resolution is approximately twice as fine as the minimum requirement (depending on the projection) but does not meet the desirable requirement of 100m. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-03-28T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-03-28T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-03-28T00:00:00 Usability AP.5.1 Good 2018-03-28T00:00:00 Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values). Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information. ATLANTIC_CH10_Product_1_3 New York: A representative sample area to test data sources against GEBCO sited in an area of interest for future shipping requirements. Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory) -73.6 -72.65 39.6 40.45 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 6750 2018-03-28T00:00:00 Full AOI of approaches to New York is covered. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-03-28T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-03-28T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-03-28T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-03-28T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 100 2018-03-28T00:00:00 Meets desirable requirement of 100m. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-03-28T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-03-28T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-03-28T00:00:00 Usability AP.5.1 Good 2018-03-28T00:00:00 Each dataset takes a long time to be prepared for download from NOAA (can be up to a day of waiting for download link), which is not viable. USGS have demonstrated the value of integrating multiple surveys into a single product with their Atlantic Margin Bathymetry dataset (as used in the Uncertainty Map), validating the possibility and usefulness of such a product. ATLANTIC_CH10_Product_1_4 Azores: A representative sample area to test data sources against GEBCO sited in an area of interest in the mid-Atlantic. Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory) -26.42 -23.9 37.37 39.9 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 62500 2018-03-28T00:00:00 Full AOI including the Azores and surrounding Ocean is covered. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-03-28T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-03-28T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-03-28T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-03-28T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 250 2018-03-28T00:00:00 Resolution is approximately twice as fine as the minimum requirement of 500m, but did not meet desirable requirement of 100m. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-03-28T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-03-28T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-03-28T00:00:00 Usability AP.5.1 Good 2018-03-28T00:00:00 Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values). Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information. ATLANTIC_CH10_Product_1_5 Halifax: A representative sample area to test data sources against GEBCO sited in an area of interest for future shipping requirements. Marine water|Bathymetry and Elevation|Depth below surface of the water body by unknown instrument and correction to zero at sea level and conversion to depth using unspecified algorithm|High level analyzed|Delayed (mandatory) -63.7 -63 44.24 44.63 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 1600 2018-03-28T00:00:00 Area giving approaches to Halifax was covered in full. Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-03-28T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-03-28T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-03-28T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-03-28T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 500 2018-03-28T00:00:00 Resolution met minimum requirement of 500m. Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-03-28T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-03-28T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-03-28T00:00:00 Usability AP.5.1 Good 2018-03-28T00:00:00 CHS Data used: Data is in raster format, requires some pre-processing to extract depth band and convert to a format to use with other bathymetry layers, including merging into single layer. Confidence information hard to determine, not all data interpolated. Data was a mixture of continuous raster surfaces ranging to oddly scattered raster pixels, not a lot of consistency throughout the whole dataset. This was categorised into confidence values. Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % 0 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 60 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 60 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % 0 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 53.6 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 53.6 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % 0 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 80 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 80 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % 0 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 50 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 50 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % 0 Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % 0 Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS