f8f7f98e-d31e-4a64-bf0c-f6db5cce3551 2025-01-28T08:44:52.444815Z ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product http://www.opengis.net/def/crs/EPSG/0/4326 ATLANTIC_CH02_Product_1 / MPA Atlantic network classified in IUCN classification 2018-02-18 creation DOI:10.12770/f8f7f98e-d31e-4a64-bf0c-f6db5cce3551 Not Applicable We took inspiration from a “Matrix of marine activities” (appropriate for each IUCN management category) extracted from IUCN paper, to achieve the first objective by computing 1 product comprising the following 12 components: Product ATLANTIC_CH02_Product_1 / MPA Atlantic network classified in IUCN classification • Traditional fishing area • Sustainable fishing area (industrial) • Leisure fishing area • Leisure activity area (diving, surfing, tourist beaches) • Shipping area (shipping trajectory, aids navigation) • Scientific activity area • Renewable energy generation facility area (ocean energy facilities, wind farms) • Aquaculture area (finfish production, shellfish production) • Shipping infrastructure area (harbours, dredging area...) • Waste discharge area • Mining area (aggregate extraction, hydrocarbon extraction) • Habitation area (urban area) Each geographic information required for the components was compiled into a layer in grid format. These grids were intersected with the MPAs layer to assign each MPA a IUCN category according to the conditional matrix illustrated below : If the MPA area contains : Habitation area (urban area) The IUCN category is :V If the MPA area contains : Mining area (aggregate extraction, hydrocarbon extraction) The IUCN category is V If the MPA area contains : Waste discharge area The IUCN category is : V If the MPA area contains : Shipping infrastructure area (harbours, dredging area...) The IUCN category is IV If the MPA area contains : Aquaculture area (finfish production, shellfish production) The IUCN category is IV If the MPA area contains : Renewable energy generation facility area (ocean energy facilities, wind farms) The IUCN category is IV If the MPA area contains : Leisure fishing area The IUCN category is IV If the MPA area contains : Sustainable fishing area (industrial) The IUCN category is IV If the MPA area contains : Shipping area (shipping trajectory, aids navigation) The IUCN category is II If the MPA area contains : Leisure activity area (diving, surfing, tourist beaches) The IUCN category is Ib If the MPA area contains : Traditional fishing area The IUCN category is Ib If the MPA area contains : Scientific activity area The IUCN category is Ia MPA Atlantic network classified in IUCN classification Anouar Hamdi anouarhamdi76@gmail.com pointOfContact EMODnet Atlantic Checkpoint back-end-atlantic-ckpt@cls.fr publisher Anouar Hamdi anouarhamdi76@gmail.com author Atlantic - CH02 - Marine Protected Areas Used by challenges 2018-03-20 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.challenges High level analyzed Processing level of characteristics 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.level.of.characteristics Delayed Production mode 2014-08-11 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.production.mode Administrative units GEMET - INSPIRE themes, version 1.0 2018-07-27 publication geonetwork.thesaurus.external.theme.httpinspireeceuropaeutheme-theme Draft Validation 2015-01-29 publication geonetwork.thesaurus.local.theme.emodnet-checkpoint.status This EMODnet Atlantic Checkpoint data product (the “Product”) is the result of a “challenge” stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an “as is” basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability or fitness for a particular purpose to the full extent permitted by law. The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product Good: The product meets more than 50% of the objectives specified by the challenge Product was achieved partially due to lack of information essential for computing the IUCN index. 1) Some information does not exist : • Traditional fishing 2) Some information is not available : • Fishing activities • Shipping 3) Some information does exist but is scattered so takes a long time to collate: • Scientific activities • Leisure or recreational activities (diving, surfing, sailing, whale watching...) • MPA management information a6be1740-a529-4817-93e0-7eff2ceda621 348b5eff-a446-40ce-8ca3-0f3a0ae146f5 dac77bb9-ef0c-45d4-8da2-f64118490c7e 725daba5-f5f8-4042-ac0e-345cad0aa6d4 461ebd89-e7bb-4c5a-bf3e-7f134a97e759 6931faaa-f9da-469d-8311-a2a4b03447f5 f085b6d3-b54b-4394-968e-6a7e744b6b44 b03ae125-9323-4964-97ea-199397ffa59f 79ec77e6-a093-4a4a-a000-1a8651e04011 8605230c-3637-40d3-b7dd-b670ef48334d 454782b0-fee5-43b3-9af6-db31c966a368 f9cb7697-23cf-4801-9235-9ea82d27c5db 853055a3-499c-45c1-9274-0abd592c1bb6 3c10106c-a491-400a-8455-75a21988a245 d1abada4-dc10-4f63-9bd8-95fb9830c323 6af60dd6-ae82-4e04-84a4-9fc6ce4a63b1 a207a7d8-aff3-4382-bbf8-0554e4189dae 3d3c68d0-d71b-4f11-bbeb-7a2917e63024 bdfde26d-abd7-4d18-9616-44d285178445 cea97aba-cd28-4890-bd56-42bad2326eef 380c117d-3eb3-470d-aeb0-902bc3f609ae e9b1d1f1-711a-4d6b-ab02-6754e1c46b9d 05a1e2fb-f5cc-4371-a1d0-23a5eea2a05a 62e37249-a9a4-4a7c-b41b-90eac0a5cf4c 55bebb73-dd5e-405a-a653-37680b2c8dff cbe07847-0c51-412d-b559-c2558587e0fe 37d846d9-f056-4b91-887b-f918eb8ef5df d37483de-a670-4ac2-ad97-f0698bbc7c26 fd2cce94-056b-4297-a2d2-29984f96598d vector utf8 oceans -97.891111 39.325331 1.433029 75.277728 0 0 ESRI Shapefile https://doi.org/10.12770/f8f7f98e-d31e-4a64-bf0c-f6db5cce3551 WWW:LINK-1.0-http--metadata-URL DOI of the product DOI of the product https://sextant.ifremer.fr/documentation/atlcheckpoint/contexte/challenge2_product1.xml OGC:OWS-C CH02_product_01 Product visualization http://www.emodnet-atlantic.eu WWW:LINK Access to the website https://sextant.ifremer.fr/documentation/atlcheckpoint/product/CH_2_product_1.zip WWW:DOWNLOAD-1.0-link--download Download product Download product -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 ATLANTIC_CH02_Product_1_1 Traditional fishing area Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 0 2017-12-18T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-18T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 0 2017-12-18T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-12-18T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-18T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 0 2017-12-18T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-18T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-18T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 0 2017-12-18T00:00:00 Usability AP.5.1 2017-12-18T00:00:00 -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 ATLANTIC_CH02_Product_1_2 MPA areas Human activities|Administrative units|Marine protected area location|High level analyzed|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 73000 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 56 2017-12-19T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Excellent 2017-12-19T00:00:00 -97.891111 39.325331 1.433029 75.277728 2015 2016 0 0 ATLANTIC_CH02_Product_1_3 Sustainable fishing area (industrial) Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 84781435 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 730 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-12-19T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 The quality of the data is not good because I extracted the information from the site http://globalfishingwatch.org/map/ after georeferencing two screenshot capture concerning fishnig activity in 2015 and 2016. And there is a lack information about fishing ship under 12 m length. -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 ATLANTIC_CH02_Product_1_4 Leisure fishing area Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 16956287 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 7300 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-12-19T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 Data available only in the EEZ of United State -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 ATLANTIC_CH02_Product_1_5 Leisure activity area (diving, surfing, tourist beaches) Human activities|Marine environment leisure usage|Leisure Ativity (Diving, Snorkeling…)|Other|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 84781435 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 7300 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-12-19T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 The information is complete only in the noth-east part of EEZ of United State (There are different information concerning leisure activity for example diving, surfing, sailing...). In the european coast only the quallity of bathing waters was available in Emodnet portal and used to compute the component. The data does exist in each country but take a long time to collect them. -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 ATLANTIC_CH02_Product_1_6 Shipping area (shipping trajectory, aids navigation) Human activities|Man-made structures|Aids to Navigation|Other|Delayed (mandatory) Human activities|Transport activity|Marine vessel traffic|Other|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 33912574 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 7300 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-12-19T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 2 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Inadequate 2017-12-19T00:00:00 Navigation trajectory data (AIS data) are not available. ATLANTIC_CH02_Product_1_7 Scientific activity area Human activities|Administrative units|Scientific activity area|Other|Delayed (mandatory) -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2017-12-19T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2017-12-19T00:00:00 Usability AP.5.1 2017-12-19T00:00:00 -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 ATLANTIC_CH02_Product_1_8 Renewable energy generation facility area (ocean energy facilities, wind farms) Human activities|Industrial activity|Offshore Installations|Other|Delayed (mandatory) Human activities|Man-made structures|Renewable energy offshore facilities|Other|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 365 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 7 2017-12-19T00:00:00 Data cover only the following countries France, Ireland, Portugal, Spain and United Kingdom. For the other countries data is scattered. Number of Characteristics AP.2.1 Number of characteristics in product Integer 2 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 Data cover only the following countries France, Ireland, Portugal, Spain and United Kingdom. For the other countries data is scattered. -97.891111 39.325331 1.433029 75.277728 2016 2016 0 0 ATLANTIC_CH02_Product_1_9 Aquaculture area (finfish production, shellfish production) Human activities|Fishery characterisation|Aquaculture|Other|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 365 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 3 2017-12-19T00:00:00 Data cover only the following countries Ireland, Spain and United Kingdom. For the other countries data is scattered. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 Data cover only the following countries Ireland, Spain and United Kingdom. For the other 50 countries data is scattered. -97.891111 39.325331 1.433029 75.277728 2016-01-01 2016-12-31 0 0 ATLANTIC_CH02_Product_1_10 Shipping infrastructure area (harbours, dredging area...) Human activities|Man-made structures|Aids to Navigation|Other|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 365 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 7 2017-12-19T00:00:00 Data cover only the following countries France, Iceland, Ireland, Norway, Portugal, Spain and United Kingdom. Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 Data cover only the following countries France, Iceland, Ireland, Norway, Portugal, Spain and United Kingdom. For the other 50 countries data is scattered. -97.891111 39.325331 1.433029 75.277728 2016-01-01 2016-12-31 0 0 ATLANTIC_CH02_Product_1_11 Waste discharge area Human activities|Administrative units|Waste disposal area|Other|Delayed (mandatory) Human activities|Litter abundance and type|Waste disposal area|Other|Delayed (mandatory) Marine water|Pollution events|Waste disposal area|High level analyzed|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 365 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 7 2017-12-19T00:00:00 Data cover only the following countries France, Ireland, Island, Spain, portugual, United Kingdom and United State. For the other countries data is scattered. Number of Characteristics AP.2.1 Number of characteristics in product Integer 3 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 Data cover only the following countries France, Ireland, Island, Spain, portugual, United Kingdom and United State. For the other countries data is scattered. -97.891111 39.325331 1.433029 75.277728 2016-01-01 2016-12-31 0 0 ATLANTIC_CH02_Product_1_12 Mining area (aggregate extraction, hydrocarbon extraction) Human activities|Industrial activity|Aggregate Extraction|Other|Delayed (mandatory) Human activities|Industrial activity|Hydrocarbon extraction|Other|Delayed (mandatory) Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 365 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 5 2017-12-19T00:00:00 Data extracted from Emodnet portal and cover only the following countries Spain, France, Ireland, Portugal and United Kingdom. Number of Characteristics AP.2.1 Number of characteristics in product Integer 2 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Limited 2017-12-19T00:00:00 Data extracted from Emodnet portal and cover only the following countries Spain, France, Ireland, Portugal and United Kingdom. ATLANTIC_CH02_Product_1_13 Habitation area (urban area) Human activities|Man-made structures|Man-made structures|Other|Delayed (mandatory) -97.891111 39.325331 1.433029 75.277728 2016-01-01 2016-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2017-12-19T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2017-12-19T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 365 2017-12-19T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 56 2017-12-19T00:00:00 Data cover all the countries Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2017-12-19T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2017-12-19T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2017-12-19T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2017-12-19T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 365 2017-12-19T00:00:00 Usability AP.5.1 Excellent 2017-12-19T00:00:00 Data cover all the countries ATLANTIC_CH02_Product_1_14 MPA management Human activities|Administrative units|Marine protected area management|Other|Delayed (mandatory) -97.891111 39.325331 1.433029 75.277728 2016-01-01 2016-12-31 0 0 Horizontal Spatial Coverage AP.1.1 Horizontal coverage extent of product (eg : surface of the Mediterranean Sea) Real km**2 2018-03-12T00:00:00 Vertical Spatial Coverage AP.1.2 Vertical coverage extent of product Real meters 2018-03-12T00:00:00 Temporal Coverage AP.1.3 Temporal coverage extent of product Integer days 2018-03-12T00:00:00 Number of items AP.1.4 Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh). Integer 2018-03-12T00:00:00 Number of Characteristics AP.2.1 Number of characteristics in product Integer 1 2018-03-12T00:00:00 Horizontal resolution AP.3.1 Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000) Integer meters 2018-03-12T00:00:00 Vertical resolution AP.3.2 Average vertical sampling Real meters 2018-03-12T00:00:00 Temporal resolution AP.3.3 Temporal sampling interval of product Real days 2018-03-12T00:00:00 Thematic accuracy AP.3.4 Percentage error of the product and description of error concept for the product (100 words max) provided by expert Percentage % Temporal validity AP.4.1 Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day. Integer days 2018-03-12T00:00:00 Usability AP.5.1 2018-03-12T00:00:00 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % -100 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -100 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 100 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 100 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 100 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 100 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 1900 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 100 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 1900 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 100 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 1900 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 100 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -87.5 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -87.5 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -94.64285714285714 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -94.64285714285714 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -87.5 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -87.5 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -87.5 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -87.5 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % -91.07142857142857 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component -91.07142857142857 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % 0 Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % 0 Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component 0 Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % 0 Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS 0 Horizontal spatial coverage error P.APE.1.1 Percentage to which the extent of the horizontal spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1 Percentage % Horizontal spatial coverage fitness for use error UD.FU.1.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical spatial coverage error P.APE.1.2 Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2 Percentage % Vertical spatial coverage fitness for use error UD.FU.1.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal coverage error P.APE.1.3 Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3 Percentage % Temporal coverage fitness for use error UD.FU.1.3 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Number of items error P.APE.1.4 Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4 Percentage % Error count fitness for use error UD.FU.1.4 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic content error P.APE.2.1 Percentage of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1 Percentage % 0 Horizontal resolution error P.APE.3.1 Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1 Percentage % Horizontal resolution fitness for use error UD.FU.3.1 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Vertical resolution error P.APE.3.2 Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2 Percentage % Vertical resolution fitness for use error UD.FU.3.2 Combination of the errors of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal sampling interval error P.APE.3.3 Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS (percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3 Percentage % Temporal resolution fitness for use error UD.FU.3.3 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Thematic accuracy errror P.APE.3.4 Compliance with the value domain of the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4 Percentage % Thematic accuracy fitness for use error UD.FU.3.4 Combination of the error of the product component Cn with the error of the selected input data set Ud Cn used for this component Temporal validity error P.APE.4.1 Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1 Percentage % Temporal validity fitness for use error UD.FU.4.1 Combination od errors of extent to which the elapsed time between last selected input data record update and the product creation date is compliant with the max elapsed time specified in DPS