Catalogue PIGMA
Invasive species monitoring parameters | Alien Species Catalogue | Hellenic Centre for Marine Research | European Seas Keystone Species Catalogue
Simple
- Alternate title
- European Seas Keystone Species Catalogue
- Date
- Identifier
- Invasive species monitoring parameters | Alien Species Catalogue | Hellenic Centre for Marine Research | European Seas Keystone Species Catalogue
- Purpose
- Inventory of non-indigenous species
- Status
- onGoing On going
edmerp
Development of Innovative Tools for Understanding Marine Biodiversity and Assessing Good Environmental Status
-
FP7-DEVOTES
http://www.devotes-project.eu/
http://www.devotes-project.eu/
edmo
Hellenic Centre for Marine Research
http://www.hcmr.gr
46,7 km Athens Sounio ave.
,
Anavyssos Attiki
,
19013
,
Greece
+302291076462
http://www.hcmr.gr
Originator
Hellenic Centre for Marine Research
http://www.hcmr.gr
46,7 km Athens Sounio ave.
,
Anavyssos Attiki
,
19013
,
Greece
+302291076462
http://www.hcmr.gr
- Maintenance and update frequency
- As needed
- Used by challenges
-
- Atlantic - CH11 - Alien Species
- Environmental matrix
-
- Marine water
- Production mode
-
- Delayed
- Visibility
-
- Cited in peer reviewed paper or grey literature but no info on how to access
- Policy visibility
-
- There is no information at all on data policy adopted by data providers
- Readyness
-
- Format not or not well documented
- Parameter Discovery Vocabulary (P02)
-
- Invasive species monitoring parameters
- GEMET - INSPIRE themes, version 1.0
-
- Species distribution
- Processing level of characteristics
-
- High level analyzed
- Data delivery mechanisms
-
- No information was found on data delivery mechanisms
- Parameter Usage Vocabulary (other)
-
- Alien Species Catalogue
- Agreed Parameter Groups (P03)
-
- Biota abundance, biomass and diversity
- Service extent
-
- Data sets are not referenced in a catalogue or are referenced in a non public catalogue
- Validation
-
- Draft
- Access constraints
- Other restrictions
- Other constraints
- Not or not well documented
- Use limitation
- Not or not well documented
- Spatial representation type
- vector Vector
- Metadata language
- Français
- Character set
- utf8 UTF8
- Topic category
-
- Oceans
- Environment description
-
Keystone species have been defined as species that have a disproportionate effect on their environment relative to their abundance. As such, keystone species might be of particular relevance for the marine biodiversity characterisation within the assessment of Good Environmental Status (GEnS), for the Marine Strategy Framework Directive (MSFD). The DEVOTES Keystone Catalogue and associated deliverable document is a review of potential keystone species of the different European marine habitats. The catalogue has 844 individual entries, which includes 210 distinct species and 19 groups classified by major habitat in the Baltic Sea, North East Atlantic,
Mediterranean, Black Sea (EU Regional Seas) and Norwegian Sea (Non-EU Sea). The catalogue and the
report make use/cite 164 and 204 sources respectively.
N
S
E
W
))
- Begin date
- 1700-01-01
Vertical extent
- Dimension name
- Time
- Resolution
- 1 year
- Transformation parameter availability
- Yes
- Checkpoint Availability
- Yes
- OnLine resource
- European Seas Keystone Species Catalogue ( WWW:LINK )
- OnLine resource
- http://www.devotes-project.eu/wp-content/uploads/2014/07/DEVOTES-D6-1-Keystones.pdf ( WWW:LINK )
- Hierarchy level
- Dataset
Domain consistency
- Name of measure
- Responsiveness
Quantitative result
- Value
- No information is found on response time
Domain consistency
- Name of measure
- Reliability
Quantitative result
- Hierarchy level
- datasetComponent
- Other
- ATLANTIC_CH11_Product_1_1
- Other
- Alien species citations file
- Other
- Marine water|Invasive species monitoring parameters||High level analyzed|Delayed
N
S
E
W
))
- Begin date
- 1245
- End date
- 2016
Vertical extent
- Minimum value
- 0
- Maximum value
- 90
Completeness omission
- Name of measure
- Horizontal Spatial Coverage
- Measure identification
- AP.1.1
- Measure description
- Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Completeness omission
- Name of measure
- Vertical Spatial Coverage
- Measure identification
- AP.1.2
- Measure description
- Vertical coverage extent of product
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Completeness omission
- Name of measure
- Temporal Coverage
- Measure identification
- AP.1.3
- Measure description
- Temporal coverage extent of product
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Conceptual consistency
- Name of measure
- Number of Characteristics
- Measure identification
- AP.2.1
- Measure description
- Number of characteristics in product
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Thematic classification correctness
- Name of measure
- Horizontal resolution
- Measure identification
- AP.3.1
- Measure description
- Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Thematic classification correctness
- Name of measure
- Vertical resolution
- Measure identification
- AP.3.2
- Measure description
- Average vertical sampling
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Thematic classification correctness
- Name of measure
- Temporal resolution
- Measure identification
- AP.3.3
- Measure description
- Temporal sampling interval of product
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Quantitative attribute accuracy
- Name of measure
- Thematic accuracy
- Measure identification
- AP.3.4
- Measure description
- Percentage error of the product and description of error concept for the product (100 words max) provided by expert
Quantitative result
- Value type
- Percentage
Temporal validity
- Name of measure
- Temporal validity
- Measure identification
- AP.4.1
- Measure description
- Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
- Hierarchy level
- datasetComponent
- Other
- ATLANTIC_CH11_Product_1_1
- Other
- Alien species citations file
- Other
- Marine water|Invasive species monitoring parameters||High level analyzed|Delayed
N
S
E
W
- Begin date
- 1245
- End date
- 2016
Vertical extent
- Minimum value
- 0
- Maximum value
- 90
Completeness omission
- Name of measure
- Horizontal Spatial Coverage
- Measure identification
- AP.1.1
- Measure description
- Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Completeness omission
- Name of measure
- Vertical Spatial Coverage
- Measure identification
- AP.1.2
- Measure description
- Vertical coverage extent of product
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Completeness omission
- Name of measure
- Temporal Coverage
- Measure identification
- AP.1.3
- Measure description
- Temporal coverage extent of product
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Conceptual consistency
- Name of measure
- Number of Characteristics
- Measure identification
- AP.2.1
- Measure description
- Number of characteristics in product
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Thematic classification correctness
- Name of measure
- Horizontal resolution
- Measure identification
- AP.3.1
- Measure description
- Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Thematic classification correctness
- Name of measure
- Vertical resolution
- Measure identification
- AP.3.2
- Measure description
- Average vertical sampling
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Thematic classification correctness
- Name of measure
- Temporal resolution
- Measure identification
- AP.3.3
- Measure description
- Temporal sampling interval of product
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
Quantitative attribute accuracy
- Name of measure
- Thematic accuracy
- Measure identification
- AP.3.4
- Measure description
- Percentage error of the product and description of error concept for the product (100 words max) provided by expert
Quantitative result
- Value type
- Percentage
Temporal validity
- Name of measure
- Temporal validity
- Measure identification
- AP.4.1
- Measure description
- Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-06-08T00:00:00
- Hierarchy level
- datasetComponent
- Other
- ATLANTIC_CH11_Product_2_2
- Other
- Trend in species appearance over 6 years
- Other
- Marine water|Invasive species monitoring parameters||Publication|Delayed (mandatory)
N
S
E
W
))
- Begin date
- 2012
- End date
- 2018 After
Vertical extent
Completeness omission
- Name of measure
- Horizontal Spatial Coverage
- Measure identification
- AP.1.1
- Measure description
- Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Completeness omission
- Name of measure
- Vertical Spatial Coverage
- Measure identification
- AP.1.2
- Measure description
- Vertical coverage extent of product
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Completeness omission
- Name of measure
- Temporal Coverage
- Measure identification
- AP.1.3
- Measure description
- Temporal coverage extent of product
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Completeness omission
- Name of measure
- Number of items
- Measure identification
- AP.1.4
- Measure description
- Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Conceptual consistency
- Name of measure
- Number of Characteristics
- Measure identification
- AP.2.1
- Measure description
- Number of characteristics in product
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Thematic classification correctness
- Name of measure
- Horizontal resolution
- Measure identification
- AP.3.1
- Measure description
- Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Thematic classification correctness
- Name of measure
- Vertical resolution
- Measure identification
- AP.3.2
- Measure description
- Average vertical sampling
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Thematic classification correctness
- Name of measure
- Temporal resolution
- Measure identification
- AP.3.3
- Measure description
- Temporal sampling interval of product
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
Quantitative attribute accuracy
- Name of measure
- Thematic accuracy
- Measure identification
- AP.3.4
- Measure description
- Percentage error of the product and description of error concept for the product (100 words max) provided by expert
Quantitative result
- Value type
- Percentage
Temporal validity
- Name of measure
- Temporal validity
- Measure identification
- AP.4.1
- Measure description
- Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
gmd:DQ_UsabilityElement
- Name of measure
- Usability
- Measure identification
- AP.5.1
gmd:DQ_DescriptiveResult
- Date / Time
- 2018-03-13T00:00:00
- Attribute description
- observation
- Content type
- Physical measurement
- File identifier
- e3868384-b7fb-4e0c-9061-e8e71f53e9f0 XML
- Metadata language
- English
- Character set
- UTF8
- Hierarchy level
- Non geographic dataset
- Hierarchy level name
- Atlantic - CH11 - Alien Species
- Date stamp
- 2016-11-17T12:34:33Z
- Metadata standard name
- ISO 19115-3 - Emodnet Checkpoint - Upstream Data
- Metadata standard version
- 1.0
Overviews
Spatial extent
N
S
E
W
N
S
E
W
N
S
E
W
N
S
E
W
Provided by
Associated resources
Not available