ATLANTIC_CH10_Product_1 / Sample areas of digital bathymetry covering representative areas of the North Atlantic.

This data product selects sample areas of digital bathymetry, chosen for their relevance to marine activities and data sources alternative to GEBCO. The approach for building the digital map of water depth is to use GEBCO as a baseline and look at a set of sample areas where GEBCO could be improved upon. Sample areas have also been selected to be representative of each continent bordering the Atlantic and expected future requirements. Data sources include GEBCO, EMODNET, USGS and CHS.

Simple

Date (Creation)
2018-01-01T00:00:00
Identifier
DOI:10.12770/fbb20839-ac88-48ca-bffb-417a939492f0
Issue identification
Not Applicable
Purpose
To assess a sample set of sites, chosen for their relevance to marine activities such as navigation and wind farm siting, with respect to improving on the GEBCO bathymetry available there.
Point of contact
  HR Wallingford
Publisher
  EMODnet Atlantic Checkpoint
Author
  HR Wallingford
Used by challenges
  • Atlantic - CH10 - Bathymetry
Processing level of characteristics
  • High level analyzed
Production mode
  • Delayed
GEMET - INSPIRE themes, version 1.0
  • Elevation
Validation
  • Approved
Use constraints
Other restrictions
Other constraints
This EMODnet Atlantic Checkpoint data product (the “Product”) is the result of a “challenge” stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an “as is” basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability or fitness for a particular purpose to the full extent permitted by law. The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product
Use limitation
Good: The product meets more than 50% of the objectives specified by the challenge
Use limitation
It was possible to build bathymetry for all of the sample areas, although it wasn't possible to improve on GEBCO for areas not covered by Europe, USA and Canada. Sources met minimum requirements of 500m resolution for sample areas, but rarely the desired 100m. There were usability problems with some sources: E.g. EMODnet - Due to supply format, metadata was unusable for large areas or whole tiles at a time. Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values). Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information. E.g. CHS - Data is in raster format, requires some pre-processing to extract depth band and convert to a format to use with other bathymetry layers, including merging into single layer. Confidence information hard to determine, not all data interpolated. Data was a mixture of continuous raster surfaces ranging to oddly scattered raster pixels, not a lot of consistency throughout the whole dataset. This was categorised into confidence values.
Aggregate Datasetindentifier
2afc945e-925b-4de3-a078-d810aa542b6d
Association Type
Cross reference
Initiative Type
specification
Aggregate Datasetindentifier
72fea185-7548-40a6-9d4f-b26772b84a0d
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
0b2c5dde-0f96-4370-9037-e23f7686382c
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
0a2d91cf-72c8-4f9d-abd3-feba0200e51a
Association Type
Cross reference
Initiative Type
upstreamData
Spatial representation type
vector Vector
Metadata language
English
Character set
utf8 UTF8
Topic category
  • Oceans
N
S
E
W
thumbnail


Vertical extent

Reference system identifier
http://www.opengis.net/def/crs/EPSG/0/4326
Distribution format
  • GeoTIFF ()

OnLine resource
DOI of the product ( WWW:LINK-1.0-http--metadata-URL )

DOI of the product

OnLine resource
CH10_product_01 ( OGC:OWS-C )

Product visualization

OnLine resource
Access to the website ( WWW:LINK )

Access to the website

OnLine resource
Download product ( WWW:DOWNLOAD-1.0-link--download )

Download product

Hierarchy level
datasetComponent
Other
ATLANTIC_CH10_Product_1_1
Other
Gibraltar: A representative sample area to test data sources against GEBCO sited in an area of interest for European shipping
Other
Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Vertical extent

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
84100

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Full AOI region covered.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
200

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Horizontal resolution exceeded the minimum requirement of 500m but did not meet desired requirement of 100m.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement

EMODnet dataset used: Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values).

Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH10_Product_1_2
Other
A representative sample area to test data sources against GEBCO sited in an area which could be explored for a possible wind farm with multi-jurisdiction.
Other
Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Vertical extent

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
10000

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Full AOI is covered

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
232

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Resolution is approximately twice as fine as the minimum requirement (depending on the projection) but does not meet the desirable requirement of 100m.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement

Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values).

Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH10_Product_1_3
Other
New York: A representative sample area to test data sources against GEBCO sited in an area of interest for future shipping requirements.
Other
Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Vertical extent

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
6750

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Full AOI of approaches to New York is covered.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
100

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Meets desirable requirement of 100m.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Each dataset takes a long time to be prepared for download from NOAA (can be up to a day of waiting for download link), which is not viable. USGS have demonstrated the value of integrating multiple surveys into a single product with their Atlantic Margin Bathymetry dataset (as used in the Uncertainty Map), validating the possibility and usefulness of such a product.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH10_Product_1_4
Other
Azores: A representative sample area to test data sources against GEBCO sited in an area of interest in the mid-Atlantic.
Other
Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below mean sea level) {bathymetric depth}|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Vertical extent

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
62500

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Full AOI including the Azores and surrounding Ocean is covered.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
250

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Resolution is approximately twice as fine as the minimum requirement of 500m, but did not meet desirable requirement of 100m.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement

Some supply formats were unexpected – GeoTiffs proved unusable as they didn’t include depth values – only a colour ramp (RGB values).

Individual surveys could be downloaded from SeaDataNet, but this was not feasible for the ACP project, as such a large area was being considered. Source information was eventually extracted by way of screen capturing the online view, georeferencing and attributing regions. Supporting files could not be opened/analysed by standard GIS software (4.5GB CSV file too big for 4GB RAM and Excel/ArcMap/FME). Depth data supplied in EMO file formats were too big/complex to be read/analysed by standard GIS software, NetCDF and SD files not feasible given the software available. GeoTiffs unusable as they had no depth information.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH10_Product_1_5
Other
Halifax: A representative sample area to test data sources against GEBCO sited in an area of interest for future shipping requirements.
Other
Marine water|Bathymetry and Elevation|Depth below surface of the water body by unknown instrument and correction to zero at sea level and conversion to depth using unspecified algorithm|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Vertical extent

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
1600

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Area giving approaches to Halifax was covered in full.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
500

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
Resolution met minimum requirement of 500m.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-03-28T00:00:00
Statement
CHS Data used: Data is in raster format, requires some pre-processing to extract depth band and convert to a format to use with other bathymetry layers, including merging into single layer. Confidence information hard to determine, not all data interpolated. Data was a mixture of continuous raster surfaces ranging to oddly scattered raster pixels, not a lot of consistency throughout the whole dataset. This was categorised into confidence values.

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
60

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
60

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
53.6

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
53.6

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
80

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
80

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
50

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
50

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
File identifier
fbb20839-ac88-48ca-bffb-417a939492f0 XML
Metadata language
English
Character set
UTF8
Hierarchy level
Dataset
Date stamp
2025-01-28T08:40:16.035019Z
Metadata standard name
ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product
 
 

Overviews

Spatial extent

N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


Keywords

GEMET - INSPIRE themes, version 1.0
Elevation
Processing level of characteristics
High level analyzed
Production mode
Delayed
Used by challenges
Atlantic - CH10 - Bathymetry
Validation
Approved

Provided by

Access to the portal

Associated resources

Not available