ATLANTIC_CH01_Product_4 / Map of offshore windfarm siting suitability in the area off S. Miguel Island (Azores archipelago)

The three digital maps provided in this product aim to assess the degree of Offshore windfarm siting suitability existing over a geographical area with a focal point off the S. Miguel island (Azores Archipelago), located in the middle of the North Atlantic ocean. The maps display respectively the spatial distribution of the average and lowest windfarm siting suitability scores along with the average wind speed distribution over a time period of 10 years. They are part of a process set up to assess the fit for use quality of the currently available datasets to support a preliminary selection of potential offshore sites for wind energy development.

To build these maps, GIS tools were applied to several key spatial datasets from the 5 data type domains considered in the project: Air, Marine Water, Riverbed/Seabed, Biota/Biology and Human Activities, collated during the initial stages of the project. Initially, each selected dataset was formatted and clipped to the study area extent and spatially classified according to suitability scores, to define raster layers with the variables depicting levels of current anthropogenic and environmental spatial occupation of activities, seabed depth and slope, distances to shoreline, shipping intensity, mean significant wave height, and substrate type. These pre-processed layers were employed as inputs for applying a spatial multi-criteria model using a wind farming suitability classification based on a discrete 5 grades index, ranging from Very Low up to Very High suitability. In adition to suitability maps, an average wind speed spatial distribution map for a 10 years period, at 10 m height, was obtained over the study area from the raster processing of a wind speed time series of monthly means available from daily wind analysis data. The characteristics of the datasets used in this exercise underwent an appropriateness evaluation procedure based on a comparison between their measured quality and those specified for the product. The study area is located to the north of the S. Miguel island. Given its remote location and deep seabed, few anthopogenic ocupancy exists. Major limitations to offshore windfarm may come from environmental protection and fishing activity, along with impacts produced in the nearshore zones. Major limitations to offshore windfarm implementation may come from environmental protection and fishing activity, along with impacts produced in the nearshore zones of the island. Major data gaps exist on fishing activities and environmental protection concerning spatial distribution of essential habitats and species.

All the spatial information made available in these maps and from the subsequent appropriateness analysis of the datasets, contributes to a clearer overview of the amount of public-access baseline knowledge currently existing for the North Atlantic basin area.

Simple

Date (Creation)
2018-03-08
Identifier
DOI:10.12770/
Issue identification
Not Applicable
Purpose
To determine the suitability of a site , in the area off the S. Miguel island (Azores archipelago) for offshore wind farm development, to evidence the fitness for use of the current available marine datasets, as well as to point out gaps in the current Emodnet data collection framework.
Point of contact
  Instituto Português do Mar e da Atmosfera (IPMA)
Publisher
  EMODnet Atlantic Checkpoint
Author
  Instituto Português do Mar e da Atmosfera (IPMA)
Used by challenges
  • Atlantic - CH01 - Windfarm Siting
Processing level of characteristics
  • High level analyzed
Production mode
  • Delayed
GEMET - INSPIRE themes, version 1.0
  • Energy resources
Validation
  • Draft
Use constraints
Other restrictions
Other constraints
This EMODnet Atlantic Checkpoint data product (the “Product”) is the result of a “challenge” stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an “as is” basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability or fitness for a particular purpose to the full extent permitted by law. The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product
Use limitation
Limited: The product fails in most aspects to meet the objectives but meet some.
Use limitation
The product is scored as limited because some key data inputs presented either important gaps or limited quality to conveniently support OWF siting in this island study area though some data components attained the imposed requirements.
Aggregate Datasetindentifier
f384e868-14d5-4536-9c05-ceea4c4e08f0
Association Type
Cross reference
Initiative Type
specification
Aggregate Datasetindentifier
697b3e20-e47a-460e-95ef-0a466996ff6e
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
4dfbbc89-6af3-4d1b-abf0-f77310835a77
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
56ca2546-6343-411b-99da-a09ce0b5e3ad
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
43bc0ba3-defe-4ae9-8afd-4459a4e2f0b8
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
3b298f09-b347-423f-9474-98e34ae4110c
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
085280d7-0796-4039-af06-ba97a98631e9
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
bdfe3873-2dec-4d81-a7e4-e1b61297a790
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
e6739b31-2805-41b2-91da-d2f6115427f6
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
5b0768dd-540c-498e-b568-e2fb2ae1b46d
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
0c0b164d-173b-4d3e-a3c2-a05328cc89f8
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
98174dbd-1913-4679-8198-72bfde224e09
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
bee88595-1915-4ed0-80c5-8490b2199645
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
dea2a1d0-9716-42cd-95a0-309e8604c31a
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
d4ba73f7-770e-4b48-ad3d-92b4c9ffc29e
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
3b9f73d5-6aae-4f75-aa1d-c90b6f314641
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
7a90cbef-ef10-46d6-91a3-02d20872b44f
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
108abacb-322a-4c30-be27-c345078a11c9
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
96b36766-d37f-478b-a053-eb4e7f0cff75
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
a29b54a4-e690-4ede-92e3-e31f91e7f6d6
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
a5a32586-e195-4360-adcb-b24b3e9ef31c
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
b5e64d97-2137-49c7-b903-ec00f74312e6
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
ee18994b-4d11-400b-8df5-e2f59f5fd3bc
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
21f46920-f8bd-4f95-b533-ca9dca25e46d
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
87a4e459-410e-45c7-a2f9-5b5f05e8b75b
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
adab4363-2d57-45d0-8d47-16f905435a90
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
1aa00940-9db8-498d-861a-aea19b34dab9
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
09ab0981-436a-440e-a1eb-969b4035884d
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
3cc639c4-c3b6-4e25-9d66-d157a737efc0
Association Type
Cross reference
Initiative Type
upstreamData
Spatial representation type
grid Grid
Metadata language
English
Character set
utf8 UTF8
Topic category
  • Oceans
N
S
E
W
thumbnail


Vertical extent

Minimum value
10
Maximum value
10
Reference system identifier
http://www.opengis.net/def/crs/EPSG/0/4326
Distribution format
  • ESRI raster ()

OnLine resource
DOI of the product ( DOI )

DOI of the product

OnLine resource
CH01_product_04 ( OGC:OWS-C )

Product visualization

OnLine resource
Access to the website ( WWW:LINK )

Access to the website

OnLine resource
Download product ( WWW:DOWNLOAD )

Download product

Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Other
ATLANTIC_CH01_Product_4_1
Other
Seabed depth
Other
Seabed - Riverbed|Bathymetry and Elevation|Sea-floor depth (below Lowest Astronomical Tide datum) {bathymetric depth} in the water body|High level analyzed|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
29897

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00
Statement
All study area covered.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real
Value
5000

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00
Statement
0-5000m

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00
Statement
Portugal delivered data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
230

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
420

gmd:DQ_DescriptiveResult

Date / Time
2017-08-29T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Excellent

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
This component is beyond the needs of this product
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_2
Other
Wave-induced water motion
Other
Marine water|Wave height and period statistics|Significant height of waves {Hs} on the water body|Forecast/Hindcast|Real-time (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
29897

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
Study zone covered only by one out of two datasets (totally).

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
1035

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
Avg of the two datasets in this component.

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
Modeled datasets. Country data contributors can not be used here.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
16660

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
Avg of the two datasets in this component.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real
Value
0.0833

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00
Statement
Avg temporal resolution of two datasets

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-08-31T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
This component is limited in resolution and temporal coverage though more recent data since 2015 up to now have been updated daily. Moreover only one dataset covers the study zone.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_3
Other
Wind speed
Other
Air|Wind strength and direction|Wind speed in the atmosphere|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
10
Maximum value
150

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
29897

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
Marine area covering all the study zone

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement

global modeled dataset.

No information was found on data contributors.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
25000

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
360

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Although dataset series of this component exist since 2007, the component is limited due to the coarse resolution layers and the fact that they only exist for 10 m height.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_4
Other
Essential Seabed habitats
Other
Biota - Biology|Habitat extent|Threatened and/or declining habitats|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
Points inside the study area

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
0

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
Portugal was not data contributor.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
No Scale or resolution was found in metadata

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
900

gmd:DQ_DescriptiveResult

Date / Time
2017-09-01T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Very good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
This dataset contains tenths of thousand features scattered all over the european seas. It currently gives a good account of the spatial distribution of many threatened and/or declining habitats/species.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_5
Other
Essential Fish habitats
Other
Biota - Biology|Habitat extent|Essencial Fish habitat extent|High level analyzed|Delayed (optional)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Dataset defined only for part of USA coastal Atlantic area

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
0

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal did not delivered data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No Scale or resolution was found in metadata

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
3650

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
2008

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Inadequate

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
The horizontal spatial coverage completeness can't be quantitatively assessed as it is highly incomplete (coverage only in part of USA coast).

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_6
Other
Seabed substrate
Other
Seabed - Riverbed|Lithology|Spatial distribution of Seabed substrate types|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
9985

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Three datasets contributed to this component.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal contributed with data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
292

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Avg of three datasets

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
405

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Avg value of three datasets

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Component has a good descrimination of sediment classes, but the Emodnet substrate datasets coverage is almost non existent in the Macaronesia study area. Main information is added by the Broad scale habitats map layer it holds less confidence.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_7
Other
Coastline
Other
Human activities|Terrestrial mapping|coastline|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
29897

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
The coastline of the North Atlantic area polygon covers all the study area.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Na

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No information on the contributor countries in the metadata.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
250

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
165

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Last upgrade: 15-16-2017

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Very good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Coast line component matches the requirements needed to make this product.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_8
Other
Fisheries spatial occupation
Other
Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_9
Other
MPA Network
Other
Human activities|Horizontal spatial co-ordinates|MPA Network - spatial extent|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
12

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Avg value from two datasets.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal delivered data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
50

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
From two datasets. One with 50 m resolution and the other with no information on scale or resolution in the metadata.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
1026

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Avg value from two datasets

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Datasets are deemed good as they are compiled by credible European environmental institutions and with a good assortment of features over the North Atlantic.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_10
Other
Vessel Traffic Density
Other
Human activities|Transport activity|Vessel Traffic Density|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real
Value
29897.3826

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Covers all the study area

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Metadata does not exist.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
11270

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Metadata does not exist.

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
This component is very limited resource. Moreover, the data has a coarse resolution and metadata does not exist to explain the attributes range and their meaning. No free access to vessel traffic datasets was found though some paid access sites are available.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_11
Other
Submarine cables
Other
Human activities|Industrial activity|Submarine telecommunication cables|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No cable routes inside the study area.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal did not deliver data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
50

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
One dataset out of four has resolution reported.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
704

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Avg validity

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Good-The component as a whole is assumed good. However, there is lack of resolution information in 3 out of 4 used datasets and there is uncertainty on the horizontal coverage completeness as it cannot be assessed. Comparing the amount of features among the datasets, it seems that knowledge gaps exist in all the current submarine cables datasets.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_12
Other
Offshore Installations
Other
Human activities|Industrial activity|Offshore Instalations|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No instalation features fall inside the study area

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No information was found on countries that delivered data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No information was found on horizontal resolution of the datasets of this component.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
456

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Avg of two datasets.

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
The component is assumed good as data is issued by credible marine data producer institution (OSPAR ). No Offshore instalation is currently located there. However, there is uncertainty on the horizontal coverage completeness as it cannot be assessed: it is impossible to determine if no spatial feature inside the study area is due to a actual absence of feature or if it is a knowledge gap (i.e. no metadata information is made available in this regard).
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_13
Other
limits of IBA sites
Other
Biota - Biology|Administrative units|Limits of IBA sites|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_14
Other
Ports location
Other
Human activities|Terrestrial mapping|Ports geographic location|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Port feature exists.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Ports data of this dataset was provided by the EUROSTAT

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
50

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
237

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Very good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
The datasets found are good enough to this product.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_15
Other
Dredging sites
Other
Human activities|Industrial activity|Dredging sites and locations.|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
no features inside the study area.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Na

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
portugal delivered data

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No information was found in the metadata.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
195

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Limited because spatial coverage of sites would have been much more appropriate than mere point location, though we can implement exclusion buffers around the points.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_16
Other
Aggregate Extraction sites
Other
Human activities|Industrial activity|Aggregate Extraction locations|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No features were found in the study area.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
0

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal did not deliver data

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No information was found in the metadata.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
928

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Limited because spatial coverage of sites would have been much more appropriate than mere point location, though we can implement exclusion buffers around the points.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_17
Other
Munition sites
Other
Human activities|Administrative units|Munition dumping areas|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No features were found in the study area.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal did not deliver data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No information in the metadata was found ou scale or resolution.

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
915

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
A mix of polygon and point location were collated. The component usability is limited where only point data exist because spatial coverage of sites would have been much more appropriate than point location, though we can implement exclusion buffers around points.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_18
Other
Dredge spoil sites
Other
Seabed - Riverbed|Administrative units|Dredge spoil dumping areas|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No point features existe inside the study area

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal delivered data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
195

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
The component is assumed good. However, there is uncertainty on the horizontal coverage completeness as it cannot be assessed. The component usability is limited where only point data exist because spatial coverage of sites would have been much more appropriate than point location, though we canimplement exclusion buffers around points.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_19
Other
Cables and pipelines
Other
Human activities|Industrial activity|Cables and pipelines|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No feature inside.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal did not deliver data

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No information on scale or resolution was found in the metadata

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
12

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Inadequate

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
This component is inadequate because it is based on the UK EEZ (UK national data repository) and no dataset was discovered concerning onshore power grid network for conection of the power submarine cables of windfarm plants required for the integration in the Energy system.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_20
Other
Offshore activities sites
Other
Human activities|Industrial activity|Offshore activities|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No features inside the study area.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
0

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal Did not deliver data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
50

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
377

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Avg of two datasets.

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Component limited because spatial coverage with polygons would be much more appropriate than mere point locations, though we could implement exclusion buffers around the points for this study. Moreover, the horizontal coverage completeness can't be quantitatively assessed from metadata.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH01_Product_4_21
Other
Natura2000 spatial extent
Other
Biota - Biology|Administrative units|Natura2000 spatial extent|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006-01-01
End date
2015-12-31

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
No feature lays inside the study zone.

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
Portugal delivered data.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer
Value
50

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
NA

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage
Statement
NA

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
360

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Good

gmd:DQ_DescriptiveResult

Date / Time
2018-01-10T00:00:00
Statement
The component is assumed good because it is an updated edition made by a credible institution (EEA). However, there is uncertainty on the horizontal coverage completeness as it cannot be assessed.

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
-0.0012797106861147794

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-0.0012797106861147794

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
54

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
54

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
76.98630136986301

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
76.98630136986301

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
-0.0012797106861147794

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-0.0012797106861147794

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
-71.6593647316539

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-71.6593647316539

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
-66.6

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-66.6

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage
Value
91.67

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
91.67

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
99.94520547945206

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
99.94520547945206

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
-0.0012797106861147794

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-0.0012797106861147794

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
-150

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-100

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
1.36986301369863

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
1.36986301369863

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-100

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-100

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
17.80821917808219

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
17.80821917808219

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-100

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-100

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
-66.6024275984614

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-66.6024275984614

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
-16.8

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-16.8

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
86.46575342465754

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
86.46575342465754

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
-0.0012797106861147794

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-0.0012797106861147794

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
50

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
50

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
90.95890410958904

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
90.95890410958904

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
-99.95986270717893

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-99.95986270717893

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
80

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
80

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
6.301369863013699

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
6.301369863013699

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
-125.4

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-100

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
90

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
90

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
61.42465753424658

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
61.42465753424658

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
75.01369863013699

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
75.01369863013699

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
90

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
90

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
87.01369863013699

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
87.01369863013699

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
89.31506849315069

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
89.31506849315069

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-100

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-100

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
49.15068493150685

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
49.15068493150685

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
49.863013698630134

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
49.863013698630134

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
89.31506849315069

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
89.31506849315069

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
99.34246575342466

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
99.34246575342466

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-100

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-100

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
90

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
90

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
79.34246575342466

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
79.34246575342466

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage
Value
80

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
80

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
67.12328767123287

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
67.12328767123287
File identifier
44dbf673-9ffb-4607-953e-5dde28c1bc5a XML
Metadata language
English
Character set
UTF8
Hierarchy level
Dataset
Date stamp
2025-01-28T08:39:53.856663Z
Metadata standard name
ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product
 
 

Overviews

Spatial extent

N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


Keywords

GEMET - INSPIRE themes, version 1.0
Energy resources
Processing level of characteristics
High level analyzed
Production mode
Delayed
Used by challenges
Atlantic - CH01 - Windfarm Siting
Validation
Draft

Provided by

Access to the portal

Associated resources

Not available