• Catalogue PIGMA
  •  
  •  
  •  

ATLANTIC_CH05_Product_7 / Spatial layer of annually averaged sediment balance trend (as shoreline retreat/advance in mm/yr) for period of 10 years by stretch of coast

Calculation of the average annual sediment balance per stretch of coast for the past 10 years.

Simple

Date (Creation)
2018-04-01T00:00:00
Identifier
DOI:10.12770/d0e54ee4-0ee6-4650-91d8-f7460cfdda94
Issue identification
Not Applicable
Purpose
Understanding sediment mass balance for all coasts bordering the North Atlantic Ocean
Point of contact
  HR Wallingford
Point of contact
  HR Wallingford
Publisher
  EMODnet Atlantic Checkpoint
Author
  HR Wallingford
Author
  HR Wallingford
Used by challenges
  • Atlantic - CH05 - Coasts
Processing level of characteristics
  • High level analyzed
Production mode
  • Delayed
GEMET - INSPIRE themes, version 1.0
  • Elevation
Validation
  • Submitted
Use constraints
Other restrictions
Other constraints

This EMODnet Atlantic Checkpoint data product (the "Product") is the result of a "challenge" stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an "as is" basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability orfitness for a particular purpose to the full extent permitted by law.

The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product

Use limitation
Inadequate: Impossible to produce or fails to meet all the objectives (not usable)
Use limitation
There is not enough data to produce annual average time series or shoreline change for the past 10 years. Data of shoreline change is available but it almost always only one value, i.e. an average over years of data available. Methods, spatial and time resolution are highly variable.
Aggregate Datasetindentifier
7b52590b-0fbe-450b-9d2c-91b323b9f428
Association Type
Cross reference
Initiative Type
specification
Spatial representation type
vector Vector
Metadata language
English
Character set
utf8 UTF8
Topic category
  • Oceans
N
S
E
W
thumbnail


Begin date
2006
End date
2016

Vertical extent

Minimum value
0
Maximum value
0
Reference system identifier
http://www.opengis.net/def/crs/EPSG/0/4326
Distribution format
  • ESRI Shapefile ()

OnLine resource
DOI of the product ( WWW:LINK-1.0-http--metadata-URL )

DOI of the product

OnLine resource
Access to the website ( WWW:LINK )

Access to the website

OnLine resource
Download product ( WWW:DOWNLOAD-1.0-link--download )

Download product

Hierarchy level
datasetComponent
Other
ATLANTIC_CH05_Product_7
Other
Calculation of the average annual sediment balance per stretch of coast for the past 10 years.
Other
Marine water|Bathymetry and Elevation|Sea-floor height (above NAP datum) {bathymetric height} in the water body by multi-beam echo sounder|Other|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2006
End date
2016

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-06T00:00:00
File identifier
d0e54ee4-0ee6-4650-91d8-f7460cfdda94 XML
Metadata language
English
Character set
UTF8
Hierarchy level
Dataset
Date stamp
2025-01-28T08:42:22.307417Z
Metadata standard name
ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product
 
 

Overviews

Spatial extent

N
S
E
W
thumbnail


N
S
E
W
thumbnail


Keywords

GEMET - INSPIRE themes, version 1.0
Elevation
Processing level of characteristics
High level analyzed
Production mode
Delayed
Used by challenges
Atlantic - CH05 - Coasts
Validation
Submitted

Provided by

logo
Access to the portal
Read here the full details and access to the data.

Associated resources

Not available


  •  
  •  
  •