ATLANTIC_CH02_Product_3 / Distribution of No-Take zones

The aim of the product is to represent areas where all forms of resource extraction are prohibited such as:

• fishing

• aggregate extraction

• hydrocarbon offshore facilities

• aids to navigation

• habitation

The product is specified through the same components as for the first product plus 2 additional ones:

• Pipe lines and cables

• Military activity

Simple

Date (Creation)
2018-04-01T00:00:00
Identifier
DOI:10.12770/0d0322d3-04be-49f6-94d1-d57a13a92ab0
Issue identification
Not Applicable
Purpose
Distribution of No-Take zone
Point of contact
  Anouar Hamdi
Publisher
  EMODnet Atlantic Checkpoint
Author
  Anouar Hamdi
Used by challenges
  • Atlantic - CH02 - Marine Protected Areas
Processing level of characteristics
  • High level analyzed
Production mode
  • Delayed
GEMET - INSPIRE themes, version 1.0
  • Administrative units
Validation
  • Draft
Use constraints
Other restrictions
Other constraints
This EMODnet Atlantic Checkpoint data product (the “Product”) is the result of a “challenge” stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an “as is” basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability or fitness for a particular purpose to the full extent permitted by law. The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product
Use limitation
Good: The product meets more than 50% of the objectives specified by the challenge
Use limitation

The product presents areas that prohibit all forms of resource extraction. That requires collating all form of human activities in the study area.

Unfortunately there are many information gaps, with respect to most importantextraction activities..

Missing data:

• Different kind of fishing activities

• Leisure activities

• Shipping routes

• Scientific activities
Aggregate Datasetindentifier
935e288e-09a2-45a5-bf58-8e6f07fe9453
Association Type
Cross reference
Initiative Type
specification
Aggregate Datasetindentifier
d1abada4-dc10-4f63-9bd8-95fb9830c323
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
d37483de-a670-4ac2-ad97-f0698bbc7c26
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
37d846d9-f056-4b91-887b-f918eb8ef5df
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
05a1e2fb-f5cc-4371-a1d0-23a5eea2a05a
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
55bebb73-dd5e-405a-a653-37680b2c8dff
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
6931faaa-f9da-469d-8311-a2a4b03447f5
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
cea97aba-cd28-4890-bd56-42bad2326eef
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
f9cb7697-23cf-4801-9235-9ea82d27c5db
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
e9b1d1f1-711a-4d6b-ab02-6754e1c46b9d
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
79ec77e6-a093-4a4a-a000-1a8651e04011
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
bdfde26d-abd7-4d18-9616-44d285178445
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
cbe07847-0c51-412d-b559-c2558587e0fe
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
6af60dd6-ae82-4e04-84a4-9fc6ce4a63b1
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
380c117d-3eb3-470d-aeb0-902bc3f609ae
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
3d3c68d0-d71b-4f11-bbeb-7a2917e63024
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
461ebd89-e7bb-4c5a-bf3e-7f134a97e759
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
725daba5-f5f8-4042-ac0e-345cad0aa6d4
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
a207a7d8-aff3-4382-bbf8-0554e4189dae
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
dac77bb9-ef0c-45d4-8da2-f64118490c7e
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
8605230c-3637-40d3-b7dd-b670ef48334d
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
b03ae125-9323-4964-97ea-199397ffa59f
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
454782b0-fee5-43b3-9af6-db31c966a368
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
62e37249-a9a4-4a7c-b41b-90eac0a5cf4c
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
f085b6d3-b54b-4394-968e-6a7e744b6b44
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
853055a3-499c-45c1-9274-0abd592c1bb6
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
3c10106c-a491-400a-8455-75a21988a245
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
348b5eff-a446-40ce-8ca3-0f3a0ae146f5
Association Type
Cross reference
Initiative Type
upstreamData
Spatial representation type
vector Vector
Metadata language
English
Character set
utf8 UTF8
Topic category
  • Oceans
N
S
E
W
thumbnail


Vertical extent

Minimum value
0
Maximum value
0
Reference system identifier
http://www.opengis.net/def/crs/EPSG/0/4326
Distribution format
  • ESRI Shapefile ()

OnLine resource
DOI of the product ( WWW:LINK-1.0-http--metadata-URL )

DOI of the product

OnLine resource
CH02_product_03 ( OGC:OWS-C )

Product visualization

OnLine resource
Access to the website ( WWW:LINK )

Access to the website

OnLine resource
Download product ( WWW:DOWNLOAD-1.0-link--download )

Download product

Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_1
Other
Traditional fishing area
Other
Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
2

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-18T00:00:00
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_2
Other
MPA areas
Other
Human activities|Administrative units|Marine protected area location|High level analyzed|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
73000

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
56

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Excellent

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_3
Other
Sustainable fishing area (industrial)
Other
Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
2

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_4
Other
Leisure fishing area
Other
Human activities|Administrative units|Fishing areas|High level analyzed|Delayed (mandatory)
Other
Human activities|Administrative units|Fishing areas|Other|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
2

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_5
Other
Leisure activity area (diving, surfing, tourist beaches)
Other
Human activities|Marine environment leisure usage|Leisure Ativity (Diving, Snorkeling…)|Other|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_6
Other
Shipping area (shipping trajectory, aids navigation)
Other
Human activities|Man-made structures|Aids to Navigation|Other|Delayed (mandatory)
Other
Human activities|Transport activity|Marine vessel traffic|Other|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
2

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Hierarchy level
datasetComponent
Other
ATLANTIC_CH02_Product_3_7
Other
Scientific activity area
N
S
E
W
thumbnail


Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_8
Other
Renewable energy generation facility area (ocean energy facilities, wind farms)
Other
Human activities|Industrial activity|Offshore Installations|Other|Delayed (mandatory)
Other
Human activities|Man-made structures|Renewable energy offshore facilities|Other|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
7

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries France, Ireland, Portugal, Spain and United Kingdom. For the other countries data is scattered.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
2

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries France, Ireland, Portugal, Spain and United Kingdom. For the other countries data is scattered.
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_9
Other
Aquaculture area (finfish production, shellfish production)
Other
Human activities|Fishery characterisation|Aquaculture|Other|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
3

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries Ireland, Spain and United Kingdom. For the other countries data is scattered.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries Ireland, Spain and United Kingdom. For the other countries data is scattered.
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_10
Other
Shipping infrastructure area (harbours, dredging area...)
Other
Human activities|Man-made structures|Aids to Navigation|Other|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
7

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries France, Iceland, Ireland, Norway, Portugal, Spain and United Kingdom.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries France, Iceland, Ireland, Norway, Portugal, Spain and United Kingdom. For the other 50 countries data is scattered.
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_11
Other
Waste discharge area
Other
Human activities|Administrative units|Waste disposal area|Other|Delayed (mandatory)
Other
Human activities|Litter abundance and type|Waste disposal area|Other|Delayed (mandatory)
Other
Marine water|Pollution events|Waste disposal area|High level analyzed|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
7

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries France, Ireland, Island, Spain, portugual, United Kingdom and United State. For the other countries data is scattered.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
3

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data cover only the following countries France, Ireland, Island, Spain, portugual, United Kingdom and United State. For the other countries data is scattered.
Hierarchy level
datasetComponent
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31

Vertical extent

Minimum value
0
Maximum value
0
Other
ATLANTIC_CH02_Product_3_12
Other
Mining area (aggregate extraction, hydrocarbon extraction)
Other
Human activities|Industrial activity|Aggregate Extraction|Other|Delayed (mandatory)
Other
Human activities|Industrial activity|Hydrocarbon extraction|Other|Delayed (mandatory)

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
5

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data extracted from Emodnet portal and cover only the following countries Spain, France, Ireland, Portugal and United Kingdom.

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
2

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Limited

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data extracted from Emodnet portal and cover only the following countries Spain, France, Ireland, Portugal and United Kingdom.
Hierarchy level
datasetComponent
Other
ATLANTIC_CH02_Product_3_14
Other
Military activity
Other
Human activities|Administrative units|Military activities|Other|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31 Now

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00
Hierarchy level
datasetComponent
Other
ATLANTIC_CH02_Product_3_15
Other
Pipe lines and cables
Other
Human activities|Hazards to navigation|Pipe lines and cables|Other|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31 Now

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
56

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Inadequate

gmd:DQ_DescriptiveResult

Date / Time
2018-01-21T00:00:00
Statement
Information extracted from Emodnet Human activities portal can explain why the usability are inadequate : "Cables are represented as stylised paths, as actual cable routes locations are not available in most cases."
Hierarchy level
datasetComponent
Other
ATLANTIC_CH02_Product_3_16
Other
MPA management
Other
Human activities|Administrative units|Marine protected area management|Other|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2016-01-01
End date
2016-12-31 Now

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1

gmd:DQ_DescriptiveResult

Date / Time
2018-03-12T00:00:00

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
100

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
100

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
100

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-87.5

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-87.5

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-94.64285714285714

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-94.64285714285714

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-87.5

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-87.5

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-87.5

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-87.5

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-91.07142857142857

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-91.07142857142857

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage
Value
0

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
Value
0

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
File identifier
0d0322d3-04be-49f6-94d1-d57a13a92ab0 XML
Metadata language
English
Character set
UTF8
Hierarchy level
Dataset
Date stamp
2025-01-28T08:41:40.279033Z
Metadata standard name
ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product
 
 

Overviews

Spatial extent

N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


N
S
E
W
thumbnail


Keywords

GEMET - INSPIRE themes, version 1.0
Administrative units
Processing level of characteristics
High level analyzed
Production mode
Delayed
Used by challenges
Atlantic - CH02 - Marine Protected Areas
Validation
Draft

Provided by

Access to the portal

Associated resources

Not available