Catalogue PIGMA
ATLANTIC_CH09_Product_5 / Annual temporal series and long term average of temperature [°C] from in situ data (2005-2014)
Simple
- Date (Creation)
- 2017-12-04T00:00:00
- Identifier
- DOI:10.12770/2a4158e4-b78b-46f7-ba4a-94ec22e578f5
- Issue identification
- Not Applicable
- Purpose
- The product aims at determination of annual series of riverine inputs into oceans : temperature.
- Validation
-
- Submitted
- Used by challenges
-
- Atlantic - CH09 - River Inputs
- Processing level of characteristics
-
- High level analyzed
- Production mode
-
- Delayed
- GEMET - INSPIRE themes, version 1.0
-
- Environmental monitoring facilities
- Use constraints
- Other restrictions
- Other constraints
- This EMODnet Atlantic Checkpoint data product (the “Product”) is the result of a “challenge” stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an “as is” basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability or fitness for a particular purpose to the full extent permitted by law. The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product
- Use limitation
- Limited: The product fails in most aspects to meet the objectives but meet some.
- Aggregate Datasetindentifier
- 7cb764cf-f341-4936-8612-69d7cbf61fb4
- Association Type
- Cross reference
- Initiative Type
- specification
- Aggregate Datasetindentifier
- adc10f38-bafe-45ac-a862-18e03df2ac6c
- Association Type
- Cross reference
- Initiative Type
- upstreamData
- Aggregate Datasetindentifier
- e2e0ce73-3c37-4e41-8384-7e0ac94efc68
- Association Type
- Cross reference
- Initiative Type
- upstreamData
- Aggregate Datasetindentifier
- 95713bf1-d090-41d2-ba14-da44c93c2162
- Association Type
- Cross reference
- Initiative Type
- upstreamData
- Aggregate Datasetindentifier
- b69a5e15-398c-4512-88ba-b29d174a1c8a
- Association Type
- Cross reference
- Initiative Type
- upstreamData
- Spatial representation type
- vector Vector
- Metadata language
- English
- Character set
- utf8 UTF8
- Topic category
-
- Oceans
))
- Begin date
- 2005-01-01
- End date
- 2014-03-12
Vertical extent
- Distribution format
-
-
ESRI Shapefile
()
-
ESRI Shapefile
()
- OnLine resource
-
DOI of the product
(
WWW:LINK-1.0-http--metadata-URL
)
DOI of the product
- OnLine resource
-
CH09_product_05
(
OGC:OWS-C
)
Product visualization
- OnLine resource
-
Access to the website
(
WWW:LINK
)
Access to the website
- OnLine resource
-
Download product
(
WWW:DOWNLOAD-1.0-link--download
)
Download product
- Hierarchy level
- datasetComponent
- Begin date
- 2005-01-01
- End date
- 2014-12-31
- Other
- ATLANTIC_CH09_Product_5_1
- Other
- Temperature
- Other
- Fresh water|Temperature of the water column|Temperature of the water body (mean over one year) [°C]|High level analyzed|Delayed (mandatory)
- Other
- Fresh water|Temperature of the water column|Temperature of the water body|Observation (raw, QC)|Delayed (mandatory)
Completeness omission
- Name of measure
- Horizontal Spatial Coverage
- Measure identification
- AP.1.1
- Measure description
- Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- not applicable
Completeness omission
- Name of measure
- Vertical Spatial Coverage
- Measure identification
- AP.1.2
- Measure description
- Vertical coverage extent of product
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- Water column of the sampled rivers
Completeness omission
- Name of measure
- Temporal Coverage
- Measure identification
- AP.1.3
- Measure description
- Temporal coverage extent of product
Quantitative result
- Value type
- Integer
- Value
- 3652
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- A period of 10 years (2005-2014)
Completeness omission
- Name of measure
- Number of items
- Measure identification
- AP.1.4
- Measure description
- Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).
Quantitative result
- Value type
- Integer
- Value
- 244
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- Total number of rivers with available information.
Conceptual consistency
- Name of measure
- Number of Characteristics
- Measure identification
- AP.2.1
- Measure description
- Number of characteristics in product
Quantitative result
- Value type
- Integer
- Value
- 4
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- Temperature
Thematic classification correctness
- Name of measure
- Horizontal resolution
- Measure identification
- AP.3.1
- Measure description
- Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)
Quantitative result
- Value type
- Integer
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- Sampling point
Thematic classification correctness
- Name of measure
- Vertical resolution
- Measure identification
- AP.3.2
- Measure description
- Average vertical sampling
Quantitative result
- Value type
- Real
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- Water column
Thematic classification correctness
- Name of measure
- Temporal resolution
- Measure identification
- AP.3.3
- Measure description
- Temporal sampling interval of product
Quantitative result
- Value type
- Real
- Value
- 365
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- Yearly mean
Quantitative attribute accuracy
- Name of measure
- Thematic accuracy
- Measure identification
- AP.3.4
- Measure description
- Percentage error of the product and description of error concept for the product (100 words max) provided by expert
Quantitative result
- Value type
- Percentage
Temporal validity
- Name of measure
- Temporal validity
- Measure identification
- AP.4.1
- Measure description
- Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.
Quantitative result
- Value type
- Integer
- Value
- 365
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
gmd:DQ_UsabilityElement
- Name of measure
- Usability
- Measure identification
- AP.5.1
- Value
- Limited
gmd:DQ_DescriptiveResult
- Date / Time
- 2017-12-04T00:00:00
- Statement
- Lack of temperature data for the majority of rivers
Completeness omission
- Name of measure
- Horizontal spatial coverage error
- Measure identification
- P.APE.1.1
- Measure description
-
Percentage to which the extent of the horizontal
spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1
Quantitative result
- Value type
- Percentage
Completeness omission
- Name of measure
- Horizontal spatial coverage fitness for use error
- Measure identification
- UD.FU.1.1
- Measure description
-
Combination of the errors of the product
component Cn with the error of the selected input data set Ud Cn used for this component
Completeness omission
- Name of measure
- Vertical spatial coverage error
- Measure identification
- P.APE.1.2
- Measure description
-
Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in
metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2
Quantitative result
- Value type
- Percentage
Completeness omission
- Name of measure
- Vertical spatial coverage fitness for use error
- Measure identification
- UD.FU.1.2
- Measure description
-
Combination of the errors of the product
component Cn with the error of the selected input data set Ud Cn used for this component
Completeness omission
- Name of measure
- Temporal coverage error
- Measure identification
- P.APE.1.3
- Measure description
-
Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in
days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3
Quantitative result
- Value type
- Percentage
- Value
- 0
Completeness omission
- Name of measure
- Temporal coverage fitness for use error
- Measure identification
- UD.FU.1.3
- Measure description
-
Combination of the errors of the product
component Cn with the error of the selected input data set Ud Cn used for this component
- Value
- 0
Completeness omission
- Name of measure
- Number of items error
- Measure identification
- P.APE.1.4
- Measure description
-
Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in
days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4
Quantitative result
- Value type
- Percentage
- Value
- -83.54686446392448
Completeness omission
- Name of measure
- Error count fitness for use error
- Measure identification
- UD.FU.1.4
- Measure description
-
Combination of the errors of the product
component Cn with the error of the selected input data set Ud Cn used for this component
- Value
- -83.54686446392448
Conceptual consistency
- Name of measure
- Thematic content error
- Measure identification
- P.APE.2.1
- Measure description
-
Percentage
of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1
Quantitative result
- Value type
- Percentage
- Value
- 33.333333333333336
Thematic classification correctness
- Name of measure
- Horizontal resolution error
- Measure identification
- P.APE.3.1
- Measure description
-
Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS
averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1
Quantitative result
- Value type
- Percentage
Thematic classification correctness
- Name of measure
- Horizontal resolution fitness for use error
- Measure identification
- UD.FU.3.1
- Measure description
-
Combination of the errors of the product
component Cn with the error of the selected input data set Ud Cn used for this component
Thematic classification correctness
- Name of measure
- Vertical resolution error
- Measure identification
- P.APE.3.2
- Measure description
-
Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS
averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2
Quantitative result
- Value type
- Percentage
Thematic classification correctness
- Name of measure
- Vertical resolution fitness for use error
- Measure identification
- UD.FU.3.2
- Measure description
-
Combination of the errors of the product
component Cn with the error of the selected input data set Ud Cn used for this component
Thematic classification correctness
- Name of measure
- Temporal sampling interval error
- Measure identification
- P.APE.3.3
- Measure description
-
Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS
(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3
Quantitative result
- Value type
- Percentage
- Value
- 0
Thematic classification correctness
- Name of measure
- Temporal resolution fitness for use error
- Measure identification
- UD.FU.3.3
- Measure description
-
Combination of the error of the product
component Cn with the error of the selected input data set Ud Cn used for this component
- Value
- 0
Quantitative attribute accuracy
- Name of measure
- Thematic accuracy errror
- Measure identification
- P.APE.3.4
- Measure description
-
Compliance with the value domain of
the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4
Quantitative result
- Value type
- Percentage
Quantitative attribute accuracy
- Name of measure
- Thematic accuracy fitness for use error
- Measure identification
- UD.FU.3.4
- Measure description
-
Combination of the error of the product
component Cn with the error of the selected input data set Ud Cn used for this component
Temporal validity
- Name of measure
- Temporal validity error
- Measure identification
- P.APE.4.1
- Measure description
-
Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in
DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1
Quantitative result
- Value type
- Percentage
- Value
- 0
Temporal validity
- Name of measure
- Temporal validity fitness for use error
- Measure identification
- UD.FU.4.1
- Measure description
-
Combination od errors of extent to which
the elapsed time between last selected input data record update and the product creation date is compliant with
the max elapsed time specified in DPS
- Value
- 0
- File identifier
- 2a4158e4-b78b-46f7-ba4a-94ec22e578f5 XML
- Metadata language
- English
- Character set
- UTF8
- Hierarchy level
- Dataset
- Date stamp
- 2025-01-28T08:39:40.984284Z
- Metadata standard name
- ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product
Overviews
Spatial extent
Provided by
