ATLANTIC_CH05_Product_1 / Spatial layer of absolute annually averaged sea level trend (in mm/year) for period of 10 years by stretch of coast

This product attempt to follow up on the sea level rise per stretch of coast of the North Atlantic, over past 10 years as follows:

• Characterization of absolute sea level trend at annual resolution, along the coasts of EU Member States (including Outermost Regions), Canada, Faroes, Greenland, Iceland, Mexico, Morocco, Norway and USA;

The stretchs or coast are defined by the administrative regions of the Atlantic Coast:

• from NUTS3** administrative division for EU countries (see Eurostat), and

• from GADM*** administrative divisions for non-EU countries.

** Third level of Nomenclature of Territorial Units for Statistics

*** Global Administrative Areas

For absolute sea level trend for 10 years we extract the information from grided satellite altimetry data and extrapolate it to the nearest strecth of coast. The product is Provided in tabular form and as a map layer.

Simple

Date (Creation)
2018-01-02
Identifier
DOI:10.12770/c674ea71-dc69-47fa-9b7e-42919f6b9fab
Issue identification
Not Applicable
Purpose
This characteristic handles the ability to follow up on the sea-level rise per stretch of coast of the North Atlantic (* ie. including North-East Atlantic, USA, Canada and Ooutermost Rregions), over past 10 years, to assess whether the current available marine datasets are available and appropriate to the use case, as well as to indicate gaps in the current EU data collection framework.
Point of contact
  EuroGOOS AISBL
Point of contact
  Irish Marine Institute
Publisher
  EMODnet Atlantic Checkpoint
Author
  EuroGOOS AISBL
Author
  Irish Marine Institute
Used by challenges
  • Atlantic - CH05 - Coasts
Processing level of characteristics
  • High level analyzed
  • Observation (raw, QC)
Production mode
  • Delayed
GEMET - INSPIRE themes, version 1.0
  • Oceanographic geographical features
Validation
  • Approved
Use constraints
Other restrictions
Other constraints

This EMODnet Atlantic Checkpoint data product (the "Product") is the result of a "challenge" stress test specified by the call for tenders No MARE/2012/11. The challenge partners ( "the producer") were commissioned to perform a number of tests to evaluate marine data according to set user requirements. This product and any resultant data and metadata produced is a consequence of these tests and provided for interest only. The Product is provided on an "as is" basis, and the producer disclaims any and all warranties, conditions, or representations (express, implied, oral or written), relating to the Product or any part thereof, including, without limitation, any and all implied warranties of quality, performance, suitability orfitness for a particular purpose to the full extent permitted by law.

The Producer and the Atlantic Checkpoint partners accept no liability for loss suffered or incurred as a result of reliance on the Product or any output of its use. The Producer shall not be liable for any economic loss, loss of profit, loss of business or contract, depletion of goodwill or otherwise, in each case whether direct, or indirect or any indirect loss whatsoever (howsoever caused) including loss or damage suffered as a result of an action brought by any person which arise out of or in connection with the use of the Product or inability to use the Product
Use limitation
Very good: The product meets more than 70% of the objectives specified by the challenge
Use limitation
It was possible to produce an average annual absolute sea-level rise trend for 10 years for most of the length of coast required due to the existence of satellite altimetry data with a temporal extension longer than 10 years and enough temporal resolution. Input data is available in a well-documented format. The limitation is that the satellite altimetry data is accessible as coarse resolution gridded data had to be extrapolated to assign a value to each stretch of coast, therefore losing some accuracy.
Aggregate Datasetindentifier
81e7954f-3fd7-410c-aae4-ffcd389ca97f
Association Type
Cross reference
Initiative Type
specification
Aggregate Datasetindentifier
a38a7fce-d49e-4f1f-9f27-5107232e52a9
Association Type
Cross reference
Initiative Type
upstreamData
Aggregate Datasetindentifier
2c4a386e-eefb-4327-88a6-669ddd4b691b
Association Type
Cross reference
Initiative Type
upstreamData
Spatial representation type
grid Grid
Metadata language
English
Character set
utf8 UTF8
Topic category
  • Oceans
N
S
E
W
thumbnail


Begin date
2003-01-01
End date
2012-12-31

Vertical extent

Minimum value
0
Maximum value
0
Reference system identifier
http://www.opengis.net/def/crs/EPSG/0/4326
Distribution format
  • ESRI Shapefile ()

  • Text ()

OnLine resource
DOI of the product ( WWW:LINK-1.0-http--metadata-URL )

DOI of the product

OnLine resource
CH05_product_01 ( OGC:OWS-C )

Product visualization

OnLine resource
Access to the website ( WWW:LINK )

Access to the website

OnLine resource
Download product ( WWW:DOWNLOAD-1.0-link--download )

Download product

Hierarchy level
datasetComponent
Other
ATLANTIC_CH05_Product_1
Other
absolute annually averaged sea level trend for 10 years period by stretch of coast
Other
Marine water|Sea level|Height above sea level|High level analyzed|Delayed (mandatory)
N
S
E
W
thumbnail


Begin date
2013-01-01
End date
2012-12-13

Vertical extent

Minimum value
0
Maximum value
0

Completeness omission

Name of measure
Horizontal Spatial Coverage
Measure identification
AP.1.1
Measure description
Horizontal coverage extent of product (eg : surface of the Mediterranean Sea)

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Vertical Spatial Coverage
Measure identification
AP.1.2
Measure description
Vertical coverage extent of product

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Temporal Coverage
Measure identification
AP.1.3
Measure description
Temporal coverage extent of product

Quantitative result

Value type
Integer
Value
3650

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Completeness omission

Name of measure
Number of items
Measure identification
AP.1.4
Measure description
Count of all items in the dataset or sample. Describe the items which are counted. If the number is determined by sampling unit (density), define the sampling unit (eg size of mesh).

Quantitative result

Value type
Integer
Value
395

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Conceptual consistency

Name of measure
Number of Characteristics
Measure identification
AP.2.1
Measure description
Number of characteristics in product

Quantitative result

Value type
Integer
Value
1

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Horizontal resolution
Measure identification
AP.3.1
Measure description
Horizontal mesh size or equivalent value for the given scale of product (eg 50m for 1/50 000)

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Vertical resolution
Measure identification
AP.3.2
Measure description
Average vertical sampling

Quantitative result

Value type
Real

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

Thematic classification correctness

Name of measure
Temporal resolution
Measure identification
AP.3.3
Measure description
Temporal sampling interval of product

Quantitative result

Value type
Real
Value
365

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
annual

Quantitative attribute accuracy

Name of measure
Thematic accuracy
Measure identification
AP.3.4
Measure description
Percentage error of the product and description of error concept for the product (100 words max) provided by expert

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity
Measure identification
AP.4.1
Measure description
Max elapsed time between last input data records update and product creation date. Minimum value 1/24 day.

Quantitative result

Value type
Integer

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00

gmd:DQ_UsabilityElement

Name of measure
Usability
Measure identification
AP.5.1
Value
Very good

gmd:DQ_DescriptiveResult

Date / Time
2017-12-19T00:00:00
Statement
Data source fine to download and easy to understand. It meets the requirements of the targeted product except for the fact that the satellite altimetry data is accessible as coarse resolution gridded data and therefore had to be extrapolated to assign a value to each stretch of coast, therefore loosing accuracy.

Completeness omission

Name of measure
Horizontal spatial coverage error
Measure identification
P.APE.1.1
Measure description

Percentage to which the extent of the horizontal

spatial coverage of TPD is not compliant with the DPS extent in km**2(TDP_AP_1_1 - DPS_AP_1_1)*100/DPS_AP_1_1

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Horizontal spatial coverage fitness for use error
Measure identification
UD.FU.1.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Vertical spatial coverage error
Measure identification
P.APE.1.2
Measure description

Percentage to which the extent of the vertical spatial coverage of TPD is not compliant with the DPS extent in

metres.(TDP_AP_1_2 - DPS_AP_1_2)*100/DPS_AP_1_2

Quantitative result

Value type
Percentage

Completeness omission

Name of measure
Vertical spatial coverage fitness for use error
Measure identification
UD.FU.1.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Completeness omission

Name of measure
Temporal coverage error
Measure identification
P.APE.1.3
Measure description

Percentage to which the extent of the temporal coverage of TPD is not compliant with the DPS extent in

days.(TDP_AP_1_3 - DPS_AP_1_3)*100/DPS_AP_1_3

Quantitative result

Value type
Percentage
Value
0

Completeness omission

Name of measure
Temporal coverage fitness for use error
Measure identification
UD.FU.1.3
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Completeness omission

Name of measure
Number of items error
Measure identification
P.APE.1.4
Measure description

Percentage to which the extent of the number of items of TPD is not compliant with the DPS number of items in

days.(TDP_AP_1_4 - DPS_AP_1_4)*100/DPS_AP_1_4

Quantitative result

Value type
Percentage
Value
-2.227722772277228

Completeness omission

Name of measure
Error count fitness for use error
Measure identification
UD.FU.1.4
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
-2.227722772277228

Conceptual consistency

Name of measure
Thematic content error
Measure identification
P.APE.2.1
Measure description

Percentage

of completeness/Incompleteness of the number of characteristcs with respect to the list in DPS(TDP_AP_2_1 - DPS_AP_2_1)*100/DPS_AP_2_1

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Horizontal resolution error
Measure identification
P.APE.3.1
Measure description

Percentage to which the product averaged horizontal mesh size or horizontal scale is not compliant with the DPS

averaged mesh size or horizontal scale(DPS_AP_3_1 - TDP_AP_3_1)*100/DPS_AP_3_1

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Horizontal resolution fitness for use error
Measure identification
UD.FU.3.1
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Vertical resolution error
Measure identification
P.APE.3.2
Measure description

Percentage to which the product averaged vertical mesh size or vertical scale is not compliant with the DPS

averaged mesh size or vertical scale(DPS_AP_3_2 - TDP_AP_3_2)*100/DPS_AP_3_2

Quantitative result

Value type
Percentage

Thematic classification correctness

Name of measure
Vertical resolution fitness for use error
Measure identification
UD.FU.3.2
Measure description

Combination of the errors of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Thematic classification correctness

Name of measure
Temporal sampling interval error
Measure identification
P.APE.3.3
Measure description

Percentage to which the product temporal sampling interval is not compliant with the one defined in DPS

(percentage to be extracted from text of AP.3.3 measure)(DPS_AP_3_3 - TDP_AP_3_3)*100/DPS_AP_3_3

Quantitative result

Value type
Percentage
Value
0

Thematic classification correctness

Name of measure
Temporal resolution fitness for use error
Measure identification
UD.FU.3.3
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component
Value
0

Quantitative attribute accuracy

Name of measure
Thematic accuracy errror
Measure identification
P.APE.3.4
Measure description

Compliance with the value domain of

the accuracy defined in DPS (% extracted from thematic accuracy description)TDP_AP_3_4

Quantitative result

Value type
Percentage

Quantitative attribute accuracy

Name of measure
Thematic accuracy fitness for use error
Measure identification
UD.FU.3.4
Measure description

Combination of the error of the product

component Cn with the error of the selected input data set Ud Cn used for this component

Temporal validity

Name of measure
Temporal validity error
Measure identification
P.APE.4.1
Measure description

Percentage to which the elapsed time of the product is not compliant with the max elapsed time specified in

DPS.(DPS_AP_4_1 - TDP_AP_4_1)*100/DPS_AP_4_1

Quantitative result

Value type
Percentage

Temporal validity

Name of measure
Temporal validity fitness for use error
Measure identification
UD.FU.4.1
Measure description

Combination od errors of extent to which

the elapsed time between last selected input data record update and the product creation date is compliant with

the max elapsed time specified in DPS
File identifier
c674ea71-dc69-47fa-9b7e-42919f6b9fab XML
Metadata language
English
Character set
UTF8
Hierarchy level
Dataset
Date stamp
2025-01-28T08:44:30.97604Z
Metadata standard name
ISO 19115-3 - Emodnet Checkpoint - Targeted Data Product
 
 

Overviews

Spatial extent

N
S
E
W
thumbnail


N
S
E
W
thumbnail


Keywords

GEMET - INSPIRE themes, version 1.0
Oceanographic geographical features
Processing level of characteristics
High level analyzed Observation (raw, QC)
Production mode
Delayed
Used by challenges
Atlantic - CH05 - Coasts
Validation
Approved

Provided by

Access to the portal

Associated resources

Not available